leads from the terminals and attach them to the new switch and snap it back in place. Make sure there
are no breaks or bare wires to cause a short before putting the switch back.
Lights
The incandescent light bulb can be replaced by any 40 watt appliance bulb.
Temperature controls
CAUTION
To replace the temperature control:
1.
Remove the two mounting screws.
© 2004, IMI Cornelius Inc.
FIGURE 6
- Make sure the power supply is turned off before making any electrical repairs.
- 5 -
Reach-In Refrigerator Service Manual
Publication Number: 630460272SER