Audio Output - Philips 55PUG8808 User Manual

Room Calibration
Room calibration
 Settings > Display & Sound > Sound > Room
calibration.
This calibration will allow the TV to determine the
acoustics in your room and provide optimized sound
quality through the TV speakers that best matches the
acoustics.
You need to pair your remote control with the TV
before starting the setup and make sure the TV Audio
out setting is TV speakers. For a more accurate result,
please keep the room quiet.
To start the room calibration:
1 - Hold your remote control at the listening position
and point it toward the TV during the tuning process.
2 - Select Calibrate now or Calibrate again to start
the calibration.
3 - A test sound will be played and measured
through your remote control. Hold your remote
control and point it toward the TV; this can take
several seconds.
4 - Once your TV speakers are successfully
calibrated, select Test to listen to the sound before
and after the TV speakers are calibrated. Select Apply
to accept the setting or select Try again to redo the
calibration.
5 - When room calibration setup is successful and
applied, the TV returns to the Settings menu. Now go
to  Settings > Display &
Sound > Sound > Room calibration and select
Apply calibration to tune the audio output from the
TV speakers.
Advanced Sound Settings
Volume Control
Auto volume
 Settings > Display &
Sound > Sound > Advanced > Auto volume.
Select On or Off to switch the auto volume
adjustment on or off.
Select Night Mode for a more comfortable, quiet
listening experience.
Delta volume
 Settings > Display &
Sound > Sound > Advanced > Delta volume.
The Delta volume setting can be used to balance the
sound level difference between the TV channel and
the HDMI source input. Press
the Arrow/navigation keys to adjust the delta value
for TV speaker volume.
* Note: Delta volume is available when the input
source is set to HDMI or Analog sources and the
Audio out is set to TV speakers or HDMI sound
system.
Dolby Atmos Notification
 Settings > Display & Sound > Sound > Dolby
Atmos notification.
Switch On or Off the Dolby Atmos notification when
Dolby Atmos content begins to play on your TV.
13.4

Audio Output

Speakers and eARC
Audio out
 Settings > Display & Sound > Audio out.
Set the TV to play the sound on TV or on the
connected audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select TV speakers off, you permanently
switch off the TV speakers.
• If you select TV speakers, the TV speakers are
always on.
With an audio device connected with HDMI CEC,
select HDMI sound system. The TV will switch off
the TV speakers when the device is playing the
sound.
When the DTS Play-Fi compatible device is
configured correctly and switched on, you can select
Play-Fi Wireless Home Theater to set it as the audio
out device.
eARC
 Settings > Display & Sound > Audio output >
eARC.
Set eARC mode to Automatic or Off.
36