Suunto AMBIT3 PEAK 2.4 User Manual page 77

2. Stop pedaling and lift your feet off the pedals.
3. Scroll to CALIBRATE POWER POD with [Light Lock] and select
with [Next].
Suunto Ambit3 Peak starts calibrating the POD and indicates if the
calibration succeeded or failed. The bottom row of the display
shows the current frequency used with the power POD. The
previous frequency is shown in parentheses.
Calibration
Calibration
successful
ongoing...
120(150)
If your power POD has an auto zero feature, you can turn this
on/off through your Suunto Ambit3 Peak.
To set auto zero on/off:
1. After the calibration is completed, press [Start Stop].
2. Set auto zero On/Off with [Light Lock] and accept with [Next].
3. Wait until the setting is completed.
4. Repeat procedure if setting fails or power POD is lost.
77