Table of Contents
Advertisement
5. Accept and exit by keeping [Next] pressed.
3.12 Find back
Suunto Ambit3 Peak automatically saves the starting point of your
exercise, if you are using GPS. With Find back, Suunto Ambit3 Peak
can guide you directly back to your starting point (or to the location
where the GPS fix was established).
To find back:
1. While you are in a sport mode, keep [Next] pressed to access the
options menu.
2. Press [Next] to select NAVIGATION.
3. Scroll to Find back with [Start Stop] and select with [Next].
The navigation guidance is shown as the last display on the
selected sport mode.
3.13 Firmware updates
You can update your Suunto Ambit3 Peak software through
Movescount. When you update the software, all logs are
automatically moved to Movescount and deleted from the watch.
To update your Suunto Ambit3 Peak software:
1. Install Moveslink if you have not done so already.
2. Connect your Suunto Ambit3 Peak to your computer with the
supplied USB cable.
3. If an update is available, your watch is updated automatically.
Wait for the update to complete before unplugging the USB
cable.
45
Advertisement
Table of Contents
