[Others] Menu - LG SoundPlate LAD650W Owner's Manual

[OTHERS] menu

Quick Start
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
,
Note
y If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
y When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off ].
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about 5 minutes. If you
set this option to [On], the unit automatically
turns off within 15 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
,
Note
When you set [Auto Power Off ] function in
setting menu on, this unit will be off itself to
save electronic consumption in the case main
unit is not connected to external device and is
not used for 20 minutes.
So does this unit after six hours since Main unit
has been connected to other device using
analog input.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit.
TV Sound Connecting
You can listen to TV sound through this unit's
speaker automatically when TV is turned on.
Press W to move and press A/D to select [On] or
[Off ]. Select [OK] and press ENTER (b).
,
Note
When [TV Sound Connecting] and [Quick
Start] functions are on and this unit is turned
off, if a previously paired Bluetooth device
tries to pair with this unit, this unit turns on
automatically.
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live content from the
connected USB storage.
,
Note
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
System Setting 33
3