Front Panel Leds - Cisco 4200 Series Hardware Installation Manual

Overview
Factory Reset Button
Note
Note

Front Panel LEDs

The following figure shows the Secure Firewall 4200 front panel LEDs.
• 8-port 1/10-Gb SFP (FPR-X-NM-8X10G)
• 8-port 1/10/25-Gb ZSFP (FPR-X-NM-8X25G)
• 6-port 10-Gb SFP SR multimode hardware bypass (FPR-X-NM-6X10SR-F)
• 6-port 10-Gb SFP LR single mode hardware bypass (FPR-X-NM-6X10LR-F)
• 6-port 25-Gb SFP SR multimode hardware bypass (FPR-X-NM-6X25SR-F)
• 6-port 25-Gb SFP LR single mode hardware bypass (FPR-X-NM-6X25LR-F)
• 8-port 1-Gb 1000Base-T hardware bypass (FPR-X-NM-8X1G-F)
The Secure Firewall 4200 chassis has a recessed reset button that resets the system to the factory default.
Pressing the button down for five seconds deletes the current configuration and current files.
Use the reset button if the current credentials are lost and you want to initialize the box without having
console access.
The following occurs:
• ROMMON NVRAM is cleared and returned to default.
• All extra images are removed; the current running image remains.
• FXOS logs, core files, SSH keys, certificates, FXOS configuration, and Apache configuration are
removed.
If power is lost between when you pushed the reset button and when the reset process is complete, the
process stops and you have to push the button again after the system powers back on.
Cisco Secure Firewall 4200 Series Hardware Installation Guide

Front Panel LEDs

11