Playback Functions; Playing A Cassette; Playing Ntsc Cassettes; Tape Position Indication - Philips 14PV210/01 Service Manual

5.

PLAYBACK FUNCTIONS

Playing a cassette

a
Put a cassette into the cassette slot.
b
Press the PLAY G button.
c
If you press the STOP h
Combi will switch to pause. To stop, press the
button again.
d
To eject the cassette, press the
TV-VIDEO Combi or press the
remote control several seconds.
D Some hired cassettes may have a poor picture or
poor sound quality. This is not a fault in your
machine. Please read 'Eliminating picture
interference'.
D Some functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.

Playing NTSC cassettes

With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
D Some special features (for example, still picture) are not
possible while you are playing an NTSC cassette.

Tape position indication

D Press the
button to display the current tape position.
OK
D To change the type of tape position display, proceed as
follows:
a
During playback, press the
b
Select the line '
Tape
P rB and confirm with the
c
Select the line '
Tape counter
buttons AP q or P rB
d
With the menu buttons
' ' to check the time used, or '
USED
time left on the tape.
e
Confirm with the
OK
12
button once, the TV-VIDEO
J/h button on the
button on the
STOP h
button.
MENU
' with the menu buttons
AP q
button.
OK
' with the menu
.
or select
DSr SqC
' to check the
LEFT
button.
Searching for tape position with the picture
(picture search)
a
While a cassette is playing, press the
(forward) button once or several times.
I
b
To stop at a certain picture, press the
STOP h
D During picture search, the picture quality may not be
so good and there will be no sound.

Still picture

a
Press the
the screen.
b
Each time you press
move on one step.
Searching for tape position without the
picture (wind and rewind)
a
Stop the tape with the
b
Press the
c
To stop at a certain picture, press the

Instant View

With this function you can switch to picture search during
wind and rewind.
a
If you hold the
during wind or rewind, you will switch to picture search.
b
When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
or
STILL R button. A still picture will appear on
STILL R again, the picture will
STOP h button.
(reverse) or (forward) button.
H I
H (rewind) or I
H (reverse) or
PLAY G button.
STOP h button.
(wind) button