Front Runner SSW0009 Manual

6 pro wolf pack pro drawer wide incl. boxes

Advertisement

front runner
START HERE!
Don't be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain
aspects of your warranty.
Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components.
A complete kit will contain:
1. A Front Runner Mounting System specific to your vehicle
2. A Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the mounting system and assist you in fitting the roof rack tray or load bars to your specific
vehicle.
Please refer to the next page for a list of all the components, quantities and tools required.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
SSWO009_REV_A00
6 PRO Wolf Pack Pro
Drawer Wide Incl. Boxes

READ ME FIRST

IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
SSWO009
© 2023 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSW0009 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner SSW0009

  • Page 1 Don’t be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain aspects of your warranty. Before you begin, take a moment and open all your Front Runner rack kit boxes and gather the assembly instructions for the various components. A complete kit will contain: 1.
  • Page 2 M6 x 20 Hex Bolt M6 x 19 Flat Washer M6 Eye Nut Stud Plate M6 Nylon Washer 60mm C-Hook M8 x 16 Hex Bolt M8 x 25 Flat Washer M8 Channel Nut Track (1200mm-ALE010) SSWO009_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Assemble two D-Rings (Item 4) to either side of the Drawer as shown using the M6 x 20 Hex Bolts, M6 x 19 Flat Washer and M6 Spring Washer as shown (Item 6,7 & 8). 10mm SSWO009_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 4 Turn Buckles. Once the Drawer is secure in position tighten the wing nuts on the Turn Buckles and bolts securing the D-rings to the Drawer and the vehicle's load bay. SSWO009_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 IMPORTANT! FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
  • Page 6 2.2 as tie down points, they can be slid into any of the 3 top extrusions as shown and tighten in the requierd position. Congratulations you have completed your installation. SSWO009_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...

Table of Contents