Troy-Bilt 25B-554H711 Operator's Manual page 14

Off-Season Storage
Observe the following when preparing the edger for long-term
storage:
1. Clean and lubricate the edger thoroughly as instructed on
the previous page.
2. Refer to the Engine Operator's Manual packed separately
with the edger for engine manufacturers's storage
instructions.
3. Coat the edger blade with chassis grease to prevent rusting
and corrosion.
4. Store the edger in a dry, clean area. Do not store next to
any corrosive materials, such as lawn fertilizer.
5. Coat the edger, especially any springs and bearings with a
light oil or silicone spray.
NOTE: When storing any type of power equipment in an
poorly ventilated or metal storage shed, care should be
taken to rustproof the equipment.
14 S 7— S
ection ervice