Installation
Note: The following diagrams show the SRCABLEDUCT2UHD being installed in a rack enclosure. SRCABLEDUCT1UHD uses
the same procedure, but the cage nuts will be installed with 1U rack spaces between them rather than 2U. Both the 1U and
2U units can also be installed in a 2-post or 4-post rack in the same manner, but 12-24 hardware will be used for 2-post
mounting.
1
Install the cage nuts in the desired location
in the rack horizontally using a cage nut tool
(user-supplied).
Attach the cable manager to the rack by
2
tightening the included screws and washers
into the cage nuts.
Compete (Front)
1
2
Complete (Back)
2