The Singing Machine ISM9010 Instruction Manual page 8

Connections
Connecting the Microphone(s)
u
v
Connecting to Line Out Jack
Energy Saving (Auto Power System-APS)
This unit will automatically turn to Screen Saver mode after 15 minutes of inactivity, and
automatically turn off after 10 minutes. The unit can be powered back on by pressing the
(ON/STANDBY) button once. APS is for energy saving purposes.
NOTE: You can change the energy saving setting in the Screensave option, see the section
of Application.
Connect the wired microphone (not
included) into Mic jack u or v (when
desired).
This unit can be connected to another
audio system for greater audio output via
3.5mm AUX cord (not included).
Plug one end of AUX cord into the LINE
OUT jack located on the rear of the
machine.
Plug the other end of the AUX cord into
the Line In jack on your separate audio
device. You may need to refer to the
AUDIO
instructions of your separate audio device
OUTPUT
for more details.
— E7 —