Advertisement
Dimensions
QA85LSE
Ø132
Ø85.7
PCD 117~120
Parts Definition/ Installation/ Mounting Hole Specifications
■ Parts Definition
Lens(PC)
Bolt
LED
Housing(ABS)
Flange nut
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP65), it may cause malfunction or damage to the product.
• In case of outdoor applications, installation in the upright position is suggested to minimize the effect of rain on the product.
• For further information, please visit our website (www.qlight.com).
(Units : mm)
360°/ 3-Ø5.2 HOLES
Ø5 CABLE ENTRY
Wiring Instructions
• External power line - 20AWG (0.5sq) × 2C 400mm
• DC type : Black output line is negative(-)
■ Installation
• First, machine taps or holes on the mounting surface.
• The mounting hole of this product is 5.2mm in diameter.
• When machining holes, insert the bolt through the hole of
the product, and tighten the nut from the opposite side of the
mounting surface.
■ Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
QA85LSE
360°/3-Ø5.2 HOLES
PCD 117~120
2
DC
Red
Power
Fuse
DC12-24V
Black
Advertisement
