Table of Contents
Advertisement
Available languages
Available languages
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
1
► 1. Switch trigger
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
•
Change the direction of rotation only when the
tool comes to a complete stop. Changing it
before the tool stops may damage the tool.
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the tool, simply pull
the lower part of the switch trigger for clockwise or the
upper part for counterclockwise. Release the switch
trigger to stop.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing side grip
For 6906 only
► 1. Side grip
Fit the side grip into the groove on the middle of the
hammer case and fasten securely.
Selecting correct socket
Always use the correct size socket for bolts and nuts.
An incorrect size socket will result in inaccurate and
inconsistent fastening torque and/or damage to the bolt
or nut.
Installing or removing socket
For model 6905B
For tool with light fit detent pin
1
2
4
► 1. Socket 2. Anvil 3. Hole 4. Detent pin
Align the hole in the side of the socket with the detent
pin on the anvil and push it onto the anvil of the tool until
it locks into place. Tap it lightly if required.
To remove the socket, simply pull it off.
4 ENGLISH
2
3
4
1
Advertisement
Table of Contents
