Advertisement
Available languages
Available languages
STEP
5. COVER INSTALLATION
a) Place cover in front of the completed structure as shown in schema.
b) Unfold the cover as shown and place it onto the structure.
c) The front of the shelter is the side with windows (1 on the left. 1 on the right, if included).
d) Assemble roof on the structure making sure that the triangular corner is at the front.
e) Attach all straps around the structure pipes, going all the way around the garage. Grommets are placed
in the upper corner of each door. Put the remaining cord through these grommets and secure
to the ground with nails.
f) Tie inside ties firmly to bars.
6. DOOR ASSEMBLY
a) Take one door and place onto it the shower hooks (01-357).
b) Pass the elastic through the grommet hole and take one "S" hook and put it over the elastic.
Squeeze one end tight with a pair of pliers over the elastic. Repeat steps (a) to (b) for the other door.
7. SHELTER REINFORCEMENT
a) Place your garage in the final position you want then close the front and back doors (if supplied).
Anchor in place with brackets (90-013) and nails (90-012).
b) Fix flap to your house (if applicable). The structure has to be anchored on a flat leveled surface as
asphalt, concrete, etc. Additionnal anchors are not included.
STEP 5
STEP 6
STEP 5
STEP 7
Advertisement
