Haier QPFA10 Owner’s Manual And Installation Instruction page 13

INSTALLATION INSTRUCTIONS
CONNECT EXHAUST HOSE TO THE
4.
WINDOW PANEL
Place the Air Conditioner 20" from the wall and any other
obstructions. Extend the hose so that it reaches the
Window Kit. Insert the Exhaust Hose Adapter into the
opening in the Window Kit and slide it into the locking
position. Ensure that the hose runs straight to the
window with no excess extension. Use the small screw
to attach the exhaust hose assembly to the window
sealing plate assembly.
Important: The Air Conditioner must be vented to the
outside. Do not use a longer hose or extend the hose
included with the Air Conditioner or the unit will not cool
properly and will overheat.
49-5000626 Rev. 1
20"
50cm
COMPLETE INSTALLATION
5.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
1. Plug the power cord into a grounded 3 prong outlet.
2. Press the Reset button on the plug to ensure
the safety plug is providing power to the Air
Conditioner.
3. Allow 20" of clearance around the Air Conditioner
for proper air circulation
4. When removing the Air Conditioner, be sure to
remove the Window Kit.
13