Advertisement
IDC Icemaker Adaptor Kit Installation Instructions
1.
First step is to position and secure the kit to the dispensing unit. Whenever possible, this should be
done prior to lifting the dispenser onto the counter to allow sufficient access and also provide easier
and faster installation.
ICE MAKER
SUPPORT RAIL
2.
Place ice maker support rail into the front set of pockets in the ice bin as shown in Figure 2.
3.
Place bar into first set of pockets inside the ice bin.
4.
Place Icemaker Adaptor Kit on top of unit.
5.
Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.
6.
Apply a continuous bead of NSF International (NSF) listed silastic sealant (Dow 732 or equivalent),
supplied in kit to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped
away immediately.
Publication Number: 629088650INS
FIGURE 2
- 2 -
© 2005-2010, IMI Cornelius Inc.
Advertisement
