Advertisement
Step 2:
Attach the Center Leg Connector (C) to each Table Leg (B) using Bolts (D) and Washers (F).
Tighten all bolts using Allen Wrench (G).
Note: We recommend working in a cross corner ("X" fashion) when tightening the bolts.
Screw in Adjustable Table Leveler (I) into the bottom of all four Table Legs (B) and attach Bolt
Caps (J) to Bolts (D) and (E). See Figure 2.
Step 3:
With the help of another person turn the table in the upright position. Cover the umbrella hole in
the middle of the glass Tabletop (A) with Umbrella Cap (H). See Figure 3.
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/
Figure 2
4 of 5
Figure 3
Advertisement
