OWL DO2-85sc Operation Manual

OWL DO2-85sc Operation Manual

Multimode light sources

Advertisement

Quick Links

Dual OWL Series
Operations Guide
Multimode Light Sources
Optical Wavelength Laboratories
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Operations Guide
Date: March 21, 2019
Dual OWL Series Multimode Light
Version 3.0
Sources

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DO2-85sc and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for OWL DO2-85sc

  • Page 1 Dual OWL Series Operations Guide Multimode Light Sources Optical Wavelength Laboratories 5 Commonwealth Ave Woburn, MA 01801 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Operations Guide Date: March 21, 2019 Dual OWL Series Multimode Light Version 3.0 Sources...
  • Page 2: Table Of Contents

    PAGE GENERAL FUNCTIONAL DESCRIPTIONS APPLICATIONS PRECAUTIONS 3.1.1 Safety 3.1.2 Operational 3.1.3 Connector REQUIRED ACCESSORIES 3.2.1 Cleaning Supplies 3.2.2 Patch Cords 3.2.3 Optical Fiber Adapters TYPICAL APPLICATIONS MAINTENANCE / CALIBRATION WARRANTY SPECIFICATIONS FIGURES Figure 1 - Dual OWL Multimode Light Source...
  • Page 3: General

    1.0 GENERAL Thank you for your purchase of an Optical Wavelength Labs (OWL) Dual OWL series multimode light source. The source is simple to operate with two buttons: one for controlling power and one for selecting the output port. LED indicators highlight the selected port and verify that battery power is sufficient to maintain the calibrated output power, and wavelength is indicated by 7-segment LED display.
  • Page 4: Applications

    3.2.2 Patch Cords - Patch cords may be needed to connect the Dual OWL series light source to the system under test. The connector styles on the patch cord must match the type on the light source and the type of the system under test.
  • Page 5: Maintenance / Calibration

    4.0.2 For accurate readings, the optical connectors on Dual OWL series light sources and the connectors on the patch cords should be cleaned prior to attaching them to each other. Minimize dust and dirt buildup by replacing the dust caps after each use.

This manual is also suitable for:

Dual owl seriesDo2-13scDo2-13stDo2-85stKit-wt-d2scKit-wt-d285st-l213sc ... Show all

Table of Contents