Using The Button; Mounting On A Table - LG 43UH6100-CB Manual

CAUTION
• Avoid touching the screen at all times, as this may result in
damage to the screen.
• Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.

Using the button

(Depending on model)
You can simply operate the TV functions, pressing or moving the
button.
NOTE
• 43/49UH61** series does not have a Joystick button has only a
power On/Off button.
(A Type)
Dome Button
or
(B Type)
Joystick Button
Basic Functions
1 All running apps will close, and any recording in progress will stop.
Joystick Button
Power On (Press)
Power Off (Press and hold)
1
Volume Control
Programmes Control
Adjusting the Menu
When the TV is turned on, press the button one time.
You can adjust the Menu items pressing or moving the buttons.
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the setting menu.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for proper
ventilation.
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat, as this may result in
fire or other damage.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the
back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the
rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy
rope. Make sure to keep the rope horizontal with the flat surface.
10 cm
9