ASROCK B560M-C User Manual page 29

Serial ATA3 Connectors
Vertical:
(SATA3_0:
see p.6, No. 17)
(SATA3_1:
see p.6, No. 16)
(SATA3_A1:
see p.6, No. 19)
(SATA3_A2:
see p.6, No. 20)
SATA3_A2
Right Angle:
(SATA3_2:
see p.6, No. 11)(Upper)
(SATA3_3:
see p.6, No. 12)(Lower)
(SATA3_4:
see p.6, No. 14)(Upper)
(SATA3_5:
see p.6, No. 13)(Lower)
USB 2.0 Headers
(9-pin USB3_4)
(see p.6, No. 23)
(9-pin USB5_6)
(see p.6, No. 22)
(9-pin USB7_8)
(see p.6, No. 21)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.6, No. 9)
SATA3_A1 SATA3_0 SATA3_1
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
*If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_1 will be disabled.
*To minimize the boot
time, use Intel® B560
SATA ports (SATA3_0)
for your bootable devices.
There are three USB
2.0 headers on this
motherboard. Each USB
2.0 header can support
two ports.
There is one USB 3.2
Gen1 header on this
motherboard. This USB
3.2 Gen1 header can
support two ports.
B560M-C
21