Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Transcat PROCISION TCH Series
Summary of Contents for Transcat PROCISION TCH Series
- Page 1 Series Balances Transcat.com | 800.828.1470...
- Page 3 1. CONTENT Foot Balance Grounding foot Power adapter* Weighing pan 2. UNPACKING Keep the packaging should a warranty claim or service be required.
-
Page 4: Recommendations And Warnings
3. RECOMMENDATIONS AND WARNINGS Operate the device in a room where the temperature ranges between 10–40 °C (50–104 °F) and where the relative humidity is below 80%. Place the balance on a solid surface to ensure stability. To obtain stable and repeatable weighing results, an anti-vibration table is recommended. -
Page 5: Components Assembly
5. COMPONENTS ASSEMBLY Install the grounding foot in a freely selected opening. 6. PREPARING FOR WORK 6.1. Temperature stabilization time Prior to switching the device on, let it Connect the power Connect the reach room temperature (estimated adapter to DC connector. power adapter to stabilization time: 1-8 hours). -
Page 6: Home Screen
6.3. Switch the balance on Your balance is ready to use! To switch the device on, press ON / OFF key. 7. PANEL AND SCREEN 7.1. Panel keys Navigation Taring and taring Switching Navigation ON/OFF and zeroing Selecting working Sending weighing result mode / ESC to a printer or a computer / ENTER... -
Page 7: Basic Operations
8. BASIC OPERATIONS 7.2. Home screen TCH-1002 1000 TCH-2002 2000 TCH-6001 5000 TCH-10001 10000 TCH-20001 20000 Simultaneously press keys to Using key select "P1.CAL" parameter enter home screen. and press key. Remove any load from the weighing pan. Using key select "1.1.CA-E" parameter Press key. - Page 8 Unload the weighing pan. Wait for the adjustment completion. Adjustment completed. 8.2. Zeroing With unloaded weighing pan press key. The balance has been zeroed. 8.3. Taring With loaded weighing pan, The balance has been tared. upon result stabilization, press key.
-
Page 9: Working Modes
8.4. Working modes Using key enter working modes menu. Using key select working mode and press Weighing Parts Counting +/- control Percent weighing % Peak Hold Totalizing Animal Weighing 8.5. Weighing unit selection Using key select "P6.Unit" parameter Simultaneously press keys to enter setup screen. - Page 10 In "3.1.StUn" parameter press Using key select weighing unit and press key to confirm. 9. PERIPHERAL DEVICES CONNECTORS Power Additional display Computer Printer adapter RS 232 RS 232 USB-B USB-A Computer...
-
Page 11: Device Cleaning
10. DEVICE CLEANING 10.1. General Recommendations Apply the cleaner onto the cloth. Prior to cleaning it is necessary Use soft cloth made of either Mind not to apply the cleaner to disconnect the device from natural or synthetic fiber directly onto the device. the mains. - Page 12 Transcat.com | 800.828.1470...
Need help?
Do you have a question about the PROCISION TCH Series and is the answer not in the manual?
Questions and answers