Revised 2023-05 INTRODUCTION Uni-ram holds many patents on designs used in its innovative products. Every machine is rigorously tested for compliance with stringent Quality Assurance standards. Follow the notes on preparation, use and operation to operate this machine safely and eff ectively. Ensure that this manual is readily available to the operator at all times.
MANUAL - RECLAIMING SAND BLASTERS - UR007 SERIES Revised 2023-05 PREPARATION Note: Item numbers given below refer to the parts listing on page 6. 1. Check for transportation or handling damage. 2. Lay the carton on its side and wheel the unit out. Do not stand it back up until Step 9.
Check vacuum lines for blockage or leakage. FEATURES AND SPECIFICATIONS Uni-ram Reclaiming Sand Blasters allow sandblasting without personal breathing apparatus, face masks or separate dust removal. The abrasive media are recovered and re-used continuously for a 92% reduction in media consumption.
MANUAL - RECLAIMING SAND BLASTERS - UR007 SERIES Revised 2023-05 REPLACEMENT PARTS ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION Z9852 Moulding, Head Cover 27-570 Blast Head incl. Brush (27-611) 20-101-Y Head Cover 27-571 Blast Head without Brush 27-100S Vac Head Assy, Complete, 120V...
The items listed below under “Conditions of Warranty” as consumables are not covered. Uni-ram reserves the right to direct the customer to ship the unit collect to the Uni-ram factory or to an approved Service Center for repair using the Uni-ram Return Goods Procedure or to repair the unit on-site.
Need help?
Do you have a question about the UR007 and is the answer not in the manual?
Questions and answers