Table of Contents
Advertisement
Adjusting the System
1.
Press the MENU key to open the OSD.
2.
Using the
setting you wish to adjust.
3.
Use the / keys to select the setting.
4.
Input: Select the source from an available input source.
5.
Auto Source: Automatically searches for available input sources.
6.
DP Format: You can select which DP format you are using. The default is
set at DP1.2.
7.
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
8.
Wide Mode: You can select which screen aspect you are using. The
options are Full and Aspect.
9.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
10. HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
11. Quick Start Mode: Enable monitor rapidly.
/
keys, select System from the OSD. Then navigate to the
EN-19
Advertisement
Table of Contents
