NCTE torque sensors
Series 3000
Short description
The series 3000 covers the accurate and reliable professional torque measurement technology.
This series is mainly used in laboratory, test facilities, trials, medical engineering, process monitoring and
quality control.
Transmitted torque can be measured statically and dynamically in real time. Shaft is available as Round
shaft and Square shaft. Each sensor can be configured individually with a lot of extras, such as angle sensor
and protection class IP65.
Series 3000 offers different output signals such as 0-10 V, 4-20 mA.
The sensor is provided as a complete unit with integrated evaluation electronic, including 5 m cable,
keystones (Round shaft) and calibration certificate.
email: info@luchsinger.it
www.luchsinger.it
Technical data
Your advantages
- All data without guarantee, except technical modification -
Nominal torque: 50 Nm to 2.000 Nm, bidirectional
Rotational speed: ≤ 10.000 rpm
Accuracy: ≤ ±0,2 %
Temperature range: -40 °C to +85 °C
Protection class: IP50, IP65
Output signals: 0-10 V/4-20 mA
Output frequency: 2.500 Hz
Made in Germany (Munich, Bavaria)
Delivery ex warehouse (
<
Best price-performance ratio
Integrated electronic (Plug & Play)
Contactless measurement system
Including 5 m cable and calibration certificate
two weeks)
Page 1 - 12
V18-01