Advertisement
STEP 1
Remove the back cushions and arm pads from the sofa,
as pictured above.
STEP 3
Remove the bag of electrics from the connecting clip
on the back of the sofa.
STEP 5
Attach the back cover to the velcro strip at the bottom
to secure.
Please follow these instructions carefully in order to ensure
your sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 2
Remove the protective backing cloth from the Velcro strips,
position the arms using the Velcro to secure in place and to
attach with the zip as shown.
STEP 4
When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base
applying firm pressure until you hear a 'click' and the back
is secure.
STEP 6
Your sofa should now be fully assembled.
Advertisement
