Advertisement
STEP 1
Remove the back cushion and arm pads from the
chair, as shown above.
STEP 3
Remove the protective backing cloth from the
Velcro strips, position the arms using the Velcro
to secure in place and attach with the zip,
as shown above.
STEP 5
Attach the back cover to the velcro strip at the
bottom to secure.
Please follow these instructions carefully in order to ensure
your chair is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of
the packaging and are perfectly normal. These will diminish
over the first few weeks of use at room temperature.
STEP 2
Remove the bag of electrics from the connecting clip on the
back of the chair.
STEP 4
When fitting sofa backs ensure the connecting clips are
aligned and then lower the back section into the base applying
firm pressure until you hear a 'click' and the back is secure.
STEP 6
Connect the power as shown above.
Advertisement
