Related Manuals for Ecomatik T-Tissue
Summary of Contents for Ecomatik T-Tissue
- Page 1 ECOMATIK GmbH Temperature Muenchner Str. 23 D-85221 Dachau/Germany Tel.: +49 8131 260 738 Fax: +49 8131 260 736 e-mail: info@ecomatik.de website: www.ecomatik.de Tissue Temperature Sensor (T-Tissue) User Manual Version 2020...
- Page 2 The T-Tissue is the sensor part of the measuring system. This means that the T-Tissue sensor must be installed into the soil or underwater, and connected to a data logger for continuous data recording.
- Page 3 In case you need further assistance for installation, please do not hesitate to contact us. 4. Wiring and Logger Configuration The T-Tissue sensor is compatible with our DL 18 data logger (ordered with stereo plug), as well as with a wide range of other available data loggers, e.g. CR1000 (ordered with bare cable ends).
- Page 4 T_Soil=1/(0,001130756+0,000233897*LN(T_Soil)+0,000000088*LN(T_Soil)^3)-273.15 DL 18 data logger Ordered with stereo plug connector, the T-Tissue is compatible with our DL 18 data logger. Each T-Tissue sensor requires one of the four channels of the DL 18. For further information on DL 18 configuration for T-Tissue sensors, please refer to our DL18 manual.
- Page 5 T-Tissue Sensor The following function applies to convert the analog output signal of the T-Tissue sensor from V into Ω: *20000 where: : NTC sensor resistance in Ω corresponding to the respective mV measurement signal : excitation Voltage in V (e.g. for DL 18 logger V = 2.5 V)
Need help?
Do you have a question about the T-Tissue and is the answer not in the manual?
Questions and answers