Introduction; For Additional Air-Iq2 Assistance; Tamco Damper Assembly; Ebtron Airflow Measurement Station - Tamco AIR-IQ2 Installation Manuallines

IMPORTANT! - READ THIS FIRST!

INTRODUCTION

The TAMCO/EBTRON AIR-IQ2 Airflow Measurement Damper Solution consists of a high-quality TAMCO damper
and factory-installed, precision EBTRON Airflow Measurement Station (transmitter and flow measurement
probes) designed for negative pressure OA (outside air) and unducted return air applications. Operation of
the AIR-IQ2 in other applications may not be recommended. Please consult your TAMCO/EBTRON applications
specialist for specific applications.
Observe the following precautions during installation to prevent damage and to ensure proper operation of the
AIR-IQ2 product. Read and understand all of the information contained in this document and in the INSTALLATION
GUIDELINES document, prior to installation of the AIR-IQ2. Failure to observe the following precautions can result in
damage to the TAMCO Damper and/or EBTRON equipment that is not covered under warranty.
⚠ ⚠
The AIR-IQ2 Damper is supplied with factory-installed EBTRON airflow measurement probes with
the transmitter shipped loose for field installation. Exercise caution when unpacking, handling
and installing the AIR-IQ2 to prevent damage to the EBTRON instruments and the TAMCO damper
⚠ ⚠
assembly.
If damper frame damage is noted, contact TAMCO Customer Service for further instructions.
DO NOT HAMMER ANY PART OF THE FRAME, AS DAMAGE TO THE AIRFLOW MEASUREMENT
⚠ ⚠
STATION COMPONENTS THAT MAY RESULT IS NOT COVERED UNDER WARRANTY.
Do not adjust damper linkage mechanism. Tampering with linkage will void damper warranty.
⚠ ⚠ If damper problems remain after completing the PRE-INSTALLATION VERIFICATION (in the
INSTALLATION GUIDELINES document), please call TAMCO Customer Service.
⚠ ⚠
Damper linkage, airflow sensor probes and transmitter must remain accessible after
installation to permit setup and recommended periodic maintenance activities.
Refer to the EBTRON A4/EF O&M Manual, provided under separate cover for airflow measurement
station wiring, instrument setup and operation.

FOR ADDITIONAL AIR-IQ2 ASSISTANCE

TAMCO DAMPER ASSEMBLY:

For assistance with specific TAMCO AIR-IQ2 Damper questions or issues not covered in this document, contact
TAMCO Customer Service at 1-800-561-3449.

EBTRON AIRFLOW MEASUREMENT STATION:

Refer to the EBTRON A4/EF2 O&M Manual under separate cover for airflow measurement station wiring,
instrument setup and operation. For additional assistance with EBTRON Airflow Measurement Station
questions or issues not covered in the O&M Manual, contact your local EBTRON Representative or EBTRON
Customer Service at 1-800-232-8766.
T.A. Morrison & Co. Inc. | P.O. Box 157 Smiths Falls Stn Main, Ontario, Canada K7A 4T1 | 800 561 3449 | Fax: 800 668 8476 | tamcodampers.com
EBTRON, Inc. | 1663 Hwy. 701 S., Loris, SC USA 29569 | 800.2EBTRON (232.8766) | Fax: 843.756.1838 | www.ebtron.com
AIR-IQ2 AIRFLOW MEASUREMENT SOLUTION
CAUTION!
3