Table of Contents
Advertisement
Display
7.1
7
7.2
Delay Start
8
18
The display shows the following information:
7.1 Delay Start icon
7.2 Child safety lock
This device permits you to leave the appliance unattended dur-
ing it's functioning.
7.3
• Duration of the selected programme
After selecting a programme, the duration is displayed in
hours and minutes (for example
7.3
culated automatically on the basis of the maximum recom-
mended load for each type of fabric. After the programme
has started, the time remaining is updated every minute.
• Delayed start
The selected delay set by pressing the relevant button ap-
pears on the display for a few seconds, then the duration of
the selected programme is displayed again. The delay time
value decreases by one unit every hour and then, when 1
hour remains, every minute.
• Alarm codes
In the event of operating problems, some alarm codes can
be displayed, for example
if...»).
• Incorrect option selection
If an option which is not compatible with the set wash pro-
gramme is selected, the message Err is displayed at the bot-
tom of the display for a few seconds and the integrated red
light of button 9 start flashing.
• End of programme
When the programme has finished a zero (
the door pilot light 10 and the pilot light of button 9 go out
and the door can be opened.
The programme can be delayed from 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a maximum of 20 hours by
means of this button.
Before you start the programme, if you wish to delay the start,
press this button to select the desired delay.
The selected delay time value will appear on the display for a
few seconds, then the duration of the programme will appear
again.
You must select this option after you have set the programme
and before you start the programme.
). The duration is cal-
(see paragraph «What to do
) is displayed,
www.zanussi.com
Advertisement
Table of Contents
