Changing The Audio/Video Settings; Changing The Network Settings - Sling Media Slingbox User Manual

Changing the Audio/Video settings

If you change the cable connections to your Slingbox—for example, switching
from using the Antenna/Cable input on the Slingbox, to the A/V input—you must
apply this change within the SlingPlayer application as well. You can also set up
each Slingbox input for use as well as configure the audio and the video picture
settings. See "Audio/Video Settings" on page 28 for details.
1. Select Slingbox Directory from the View menu.
2. Select the Slingbox you want to change and click Edit Properties.
3. Select the Slingbox Configuration tab.
4. Click the Change button within the Audio/Video Setup category and follow the on-screen steps.
It's not just video: Whatever your TV source provides at home, you have access to using the Slingbox. If you receive music
channels with your cable or satellite service, tune to the channel you want to listen to and enjoy your music wherever you go.

Changing the network settings

Follow these steps if you did not set up remote viewing when you first installed
the SlingPlayer software or if you would like to change your network settings.
Note: You can only change your network settings while at home, on the same
local area network as your Slingbox.
1. Select Slingbox Directory from the View menu.
2. Select the Slingbox you want to set up for remote viewing and click Edit Properties.
3. Select the Slingbox Configuration tab.
4. Click the Change button within the Network Settings category and follow the on-screen steps.
58
Slingbox User Guide