Table of Contents
Advertisement
The XC-ES50L/ES50LCE is a monochrome video
camera module with a 1/2 type CCD for industrial use.
Like the XC-ES50/ES50CE, this model provides
various mode switches on the rear panel, making
it ideal for use in combination with other
industrial equipment.
Main Features
Various mode settings
Rear panel switches allow the following mode settings.
• Gain: Auto/Manual
• γ compensation
• Synchronized input/output
• Potential accumulation: FRAME/FIELD
• 75 Ω termination
• Shutter: Normal/Trigger shutter
External synchronization
The camera module automatically determines whether
to operate in interlace or non-interlace mode from the
HD (horizontal drive) and VD (vertical drive) signals
input for external synchronization.
Internal sync signal output
You can output the HD and VD signals from the 12-
pin connector by changing the setting of the rear panel
switch.
External trigger shutter function (EIA: 1/4
to 1/10,000 seconds, CCIR: 1/4 to 1/8,000
seconds)
You can obtain a freeze picture by inputting an
external trigger. This function is useful for shooting a
fast-moving object clearly.
Overview
Restart/Reset function
Inputting external HD and VD signals (2 VD or more)
continuously can catch one image at an arbitrary point
in time and control the stored CCD.
This function is used for long exposures and with
strobe for frame image output.
Body fixing
Mounting screw holes are provided in the reference
plane on the lower surface of the body, allowing
mounting with the absolute minimum deviation of the
optical axis.
The connector complies with the new EIAJ
12-pin pin assignment
The new pin arrangement allows the connector to
accept a trigger pulse and a WEN signal.
Overview
3
Advertisement
Table of Contents
