Page 1
TRANSDUCERIZED CORDLESS TOOL OPERATING INSTRUCTIONS ABP Series ABS Series ABN Series PC-Software: 2.0.2.21 Firmware: 2.0.2.8 10000 SE Pine St., Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
7.3.0. Straight tool ........43 - 2 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 3
- 3 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 4
General warning to prevent operating errors and failures. DANGER This indicates a direct hazard for the worker or the tool. This warning symbol is especially important and must be observed. - 4 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 5
- 5 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 6
Powerful LED Brushless high-powered motor 10 Optional WiFi module Color index 11 Optional scanner CW / CCW 12 Premium Li-Ion battery Large trigger 14 3/8“ square adapter - 6 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 7
- 7 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
The tool locks up when it is overloaded or jams in the workpiece. - 8 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
• complying with inspection and maintenance work. Any other use beyond this is not considered proper intended use. AIMCO is not liable for any damages resulting from non-compliance. 2.3.0. IMPROPER USE We are not liable for damages and operational errors that result from non-compliance with these operating instructions or improper use.
This Warranty is null and void if the customer, or any other person other than an authorized representative of AIMCO, has made any attempt to service or modify the tool or accessory prior to its return to AIMCO under this Warranty.
Page 11
AIMCO reserves the right to make periodic changes in construction or tool design at any time. AIMCO specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed.
3.3.0. RISKS WHEN WORKING WITH THE TOOL Faults that may hinder safety must be immediately rectified. - 12 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Wearing protective safety equipment such as a dust mask, safety shoes, a protective helmet and hearing protection, depending on the type and use of of the tool, decreases the risk of injuries. - 14 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
3.4.5. SERVICE NOTICE Only allow your power tool to be repaired by a qualified technician using only original spare parts, available from AIMCO. This ensures that the safety of your device is maintained. - 16 - 10000 SE Pine St.
- 17 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 18
(approx. 700 - 1000 charge cycles). In general the following applies: Avoid deep discharging or overcharging the lithium- ion battery under any circumstances. It will be permanently damaged from this. - 18 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
• Never use force when install- ing the battery. If the battery cannot be easily slide in, it has not been correctly installed. - 20 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
If the rotating direction switch is set to the center position, the trigger cannot be activated. 4.1.3. LED / BARCODE SCANNER WARNING Never look directly at the LED or barcode scanner! - 22 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
- 23 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 24
Check, that the tool is configured and parameterized correctly. NOTICE See AcraDyne Tool Manager operating instructions RISK OF INJURY If a low torque is expected and a very high torque is set unintentionally. - 24 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
- 25 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 26
/ Using the menu confirm the decline the entry / button on the entry / selection. display, you can go selection. to the next menu point. - 26 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 27
- 27 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
(cam-out effect). To ensure the SAFETY and RELIABILITY of the product, repairs, all other potential maintenance, or adjustments should be performed by AIMCO or an authorized specialist. - 28 - 10000 SE Pine St.
Tool is released for the selected / scanned screwing process. When using the barcode scanner, if there is "NO NUMBER", the corre- sponding barcode appears on the blue display element as a release. - 30 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 31
- 31 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 32
Tool has successfully started up, but cannot con- nect to the superordinate controls. NOK must be separately confirmed by the worker pressing a button on the display. - 32 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 33
- 33 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 34
The rotating direction switch stands on counter- clockwise rotation, unscrewing is not allowed. The NOK-scewing in front needs to be acknowledged. This can be programmed in the settings with the AcraDyne Tool Manager. - 34 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 35
- 35 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 36
Wi-fi connection to a superordinate control system. As soon as the power tool is connected to a control system, the Wi-fi symbol appears over the battery display. - 36 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 37
- 37 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
We will gladly assist you if you have questions. You can request exploded drawings and spare parts list at 1-800-852-1368. NOTICE All tools are delivered with software. - 38 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
715 x 73 x 92 3.10 From 60 Nm on a torque reaction device is recommended. Data of weight and length are without battery. ABN-CTA10 Dimensions in mm Not to scale - 40 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Page 41
- 41 - Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11- 9 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 E-Mail: info@hs-technik.com – Internet: www.hs-technik.com www.aimco-global.com...
Page 42
ABN-CTA55 ABN-CTA90 Dimensions in mm Not to scale - 42 - 10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368 www.aimco-global.com...
Need help?
Do you have a question about the AcraDyne ABP Series and is the answer not in the manual?
Questions and answers