Sony SLV-M11HF Operating Instructions Manual page 10

Recording TV programs (cont inued)
Tips
• To select a channel, you can use the number buttons on the remote commander.
• You can select a video source from the LINE-1 IN or LINE-2 IN jacks using the
• The display appears on the TV screen indicating information about the tape, but the
• If you don't want to watch TV while recording, you can turn off the TV. When
Notes
• The remaining tape length may not be indicated accurately for short tapes such as
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining
10
Basic Operat ions
Downloaded from:
Enter the channel number, then press ENTER.
INPUT SELECT button.
information won't be recorded on the tape.
using a cable box, make sure to leave it on.
T-20 or T-30, or tapes recorded in the LP mode.
tape length after you press DISPLAY.
https://www.usersmanualguide.com/