Inverto OneNet IDLP-5GAO1-DANOO-OPN Quick Start Manual

Outdoor 5g directional antenna

Advertisement

Outdoor 5G Directional Antenna

IDLP-5GAO1-DANOO-OPN
Item 6424
This outdoor antenna (ODA) is a dual polarisation high-gain directional antenna designed to receive and transmit 5G
signals from an indoor 5G modem. The antenna offers 17dBi peak gain for the 3.6GHz 5G band (3400 MHz – 3800
MHz range).
The unit design features an optional built-in calibration circuitry. This allows cable loss calibration to be performed
when used in conjunction with a compatible Calibration IDU, limiting the antenna output power to permitted trans-
mit EIRP levels while maintaining high performance receive capabilities at the same time. Internal switching between
calibration and operation modes is controlled from the IDU via a DC voltage on the coax cable. With no DC voltage
applied, the antenna will be in operation mode and isolated from the IDU.
A compatible wall mount is included.
Key features
■ Dual Polarization, High Gain Directional Antenna
■ Operating Frequency 3.6GHz 5G band with 17dBi gain
■ Compatible with Calibration IDU for Transmit EIRP EMF limit compliance
■ 75 Ohm 2x F-Female Ports Interface to IDU
■ Diecast chassis
■ Weatherproof
■ Surge protection
■ Wall or pole mountable, Ø32mm

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OneNet IDLP-5GAO1-DANOO-OPN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Inverto OneNet IDLP-5GAO1-DANOO-OPN

  • Page 1 Outdoor 5G Directional Antenna IDLP-5GAO1-DANOO-OPN Item 6424 This outdoor antenna (ODA) is a dual polarisation high-gain directional antenna designed to receive and transmit 5G signals from an indoor 5G modem. The antenna offers 17dBi peak gain for the 3.6GHz 5G band (3400 MHz – 3800 MHz range).
  • Page 2 5G Antenna Calibration IDU IDLP-5GAO1-IDUOO-OPN Item 6423 The Calibration IDU provides an interface between a 5G gateway modem and the outdoor antenna (ODA). The IDU function is to compensate for antenna gain and coaxial cable losses to ensure that transmit power levels do not ex- ceed a permitted EIRP limits while optimum sensitivity is maintained for Rx signals.
  • Page 3 Installation Choose a location with line of sight to the nearest cell site. This is a directional 5G antenna and will need to be accurately pointed directly at the cell site misalignment could degrade signal reception. Mount the base to an external wall, assemble the pole and slide the antenna (ODA) onto the pole.
  • Page 4 For purpose of brevity, some product descriptions in this sheet remain at platform level and may not be referred to as detailed datasheets of the products. Inverto Digital Labs reserves the right to amend, omit or add products, product-lines, and / or features without notice.

This manual is also suitable for:

Onenet idlp-5gao1-iduoo-opn64236424

Table of Contents