Download Print this page

Advertisement

Quick Links

ΩPRO
Owners Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the OmegaPRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BAVARIAN SIMTEC OmegaPRO

  • Page 1 ΩPRO Owners Manual...
  • Page 2 Mount a Quick Release M5 x 12mm Mount your desired Quick Release to Adapterplate Choose between the 70mm 50.8mm bolt pattern M5 Threaded Holes Choose between threaded and none threaded holes Mount the Adapterplate together with your quick release on to the Omega Steering Wheel with the supplied M5x12mm screws Mount your Quick Release...
  • Page 3 Steering Wheel Conection For smooth operation, we recommend using one of the following connection methods: BSTec Coiled Cable -> Powered USB Hub -> PC BSTec Coiled Cable -> Active USB Repeater -> PC To ensure proper operation, you need to have a clean, reliable USB data throughput signal and the absence of EMI (Electrical Magnetic Interference) from - Connect wheel via a powered USB hub or directly to computer.
  • Page 4: Add Device

    Setup SimHub https://www.simhubdash.com/download-2/ & install the latest SimHub version Download (v8.4.9 or greater) Add Device 1. Go to Devices Tab 2. Click Add Device...
  • Page 5 Select OmegaPRO 3. Select BavarianSimTec in the side panel 4. Select the OmegaPRO 5. Click Ok...
  • Page 6: Choose Profile

    Choose Profile 6. Simplified Profile In this profile the LED’s are grouped logically per button and encoder. 7. Advanced Profile In this profile every LED can be individual addressed allowing you full control over all 87 LED’s. This option is usually requiered for custom LED profiles...
  • Page 7 Dashboard https://download.bavariansimtec.com/BavarianSimTec_Dashboard_Ome Download the official OmegaPRO Dash (double click downloaded file to install) 8. Select LCD 9. In the dropdown Display dashboard select the BavarianSimTec OmegaPRO...
  • Page 8 LED’s 10. Select LEDs 11. Click Edit Default colors to change the button colors...
  • Page 9 Enter/Exit EditMode Press and hold encoders for 3 seconds. The dash will change to edit mode. Exit the Edit Mode with Calibrate Clutch Press and hold button (left) (right), pull the clutch completely and release the clutch. Then release the button. Cycle Clutch Modes With the buttons you change the clutch mode.