Table of Contents

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for XEV YoYo 2021

  • Page 2 This manual aims to provide users with instructions on the use and maintenance of the vehicle. Please check the purchase contract for the specific configuration of the vehicle you purchased. If you have any questions about this car and this manual, please feel free to contact XEV car service station.
  • Page 3 Warning text about personal safety or damage to the vehicle In this manual, you will find information about personal safety or possible damage to your vehicle. When operating the vehicle, you must follow the message in order to avoid personal injury or damage to the vehicle. The following classification methods and warning terms are used for the prompt information in this manual according to the danger level: ATTENTION WARNING...
  • Page 4 When replacing the parts of the vehicle, please use the genuine XEV parts to ensure the quality of maintenance and to prevent potential safety risks or damage to the vehicle caused by the use of fake and inferior parts. Failure of the vehicle due to the use of non-xev genuine parts will not be covered by our warranty.
  • Page 5 Location of vehicle identification Number The Vehicle Identification Number (VIN) is the legal identification of a vehicle and is used for registration of the owner.The vehicle identification code (VIN) is located on the vehicle as follows: 1 Engraved on the sheet metal under the passenger seat...
  • Page 6 Composition and content of vehicle identification number The vehicle identification number (VIN number) consists of 17 characters. 1. country 2. manufacturer 3. vehicle model 4. vehicle version 5. vehicle variety 6. year 7. assembly plant Represents letters or numbers 8. sequence No. Represents numbers...
  • Page 7 Vehicle nameplate LABEL-TIRE PRESSURE at the car door lock catch COLD MEDIA LABEL Above the front bumper Manufacturer’s nameplate The manufacturer’s nameplate is pasted on the right side of the front coaming. The vehicle identification code is marked on the manufacturer’s nameplate.
  • Page 8 High voltage system WARNING There are two types of voltage in the vehicle’s high voltage system, AC and DC, which • Do not press the maintenance power-off are very dangerous and can cause serious injuries such as burns, electric shock and even switch when the ignition switch is in the death.
  • Page 9 Image indexing The information contained in this manual can be listed by picture annotation for easy reference 1. Charging device Vehicle charging method, precautions and other information 2. Instrument and control devices Instrument, car keys, Windows, wipers and other device information 3.
  • Page 10: Table Of Contents

    Charging device Speed display Charging Charging requirements Driving mileage Influence of charging operation on special population Gear display Precautions for charging Warning information prompt Charging time Subtotal mileage display Cumulative mileage display Charging mode Charging case indicator light Indicator light/alarm light General charging fault diagnosis Slow charging mode Remote key...
  • Page 11 Light device Vehicle device Seats Light distribution view Light distribution view Rearview mirrors Exterior rearview mirror Lights Interior rearview mirror Lamplet Internal equipment Passing beam light Door storage bag Driving beam light Dashboard storage bag Overtaking signal Hazards warning light Console storage box Cupholder Turning light...
  • Page 12 Electric power steering (EPS) Boot screen Anti-lock braking system(ABS) Radio Parking Setting interface Parking precautions Third-party application interface Emergency stop Bluetooth Driving in special conditions Phone call Night driving Starting and driving Long distance driving Driving preparation Driving in special weather Run-in period Driving in fog Safety check before driving...
  • Page 13 Emergency treatment Repair and Maintenance Emergency treatment Regular maintenance Hazard warning lamp Instructions for regular maintenance Incident treatment Self-maintenance instructions Vehicle can’t start Brake fluid Vehicle trapped Battery, power battery Settle by oneself Battery Flat tyre Power battery Use of a warning triangle Tyre Towing Tyre inspection...
  • Page 14 Technical information Technical data Overall dimensions of vehicle Technical parameters of vehicle Drive motor, reducer technical parameters Power battery technical parameters Technical parameters of DC/DC switch Technical parameters of on-board charger Type and dosage of vehicle filling liquid The light bulb information...
  • Page 21: Charging Device

    Charging device Precautions for charging Charging requirements Influence of charging operation on special population Precautions for charging Charging time Charging mode Charging case indicator light General charging fault diagnosis Slow charging mode Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair &...
  • Page 22 Charging Requirements WARNING Influence of charging operation on special population • Before charging, check whether the • Some modules of the charging body charging interface and charging • During rapid charging operations, equipment may produce electric equipment are in good condition. electromagnetic field interference sparks inside.
  • Page 23 Precautions for charging WARNING WARNING • Please choose to charge in a relatively • Users who use any electronic medical In the process of driving, if the battery bar safe environment (e.g. avoid liquid, fire device (such as an implanted cardiac remains 30% (yellow), charge as soon as source, etc.).
  • Page 24 In order to avoid serious personal injury, ATTENTION ATTENTION the following precautions should be • Home AC charging is carried out using • Do not stay in the car while charging. taken when the vehicle is charging: the vehicle equipped with the AC •...
  • Page 25 100% and the charging current is 0). one month, balanced charging shall • The power battery needs to be fully Please contact XEV new energy vehicle be carried out before the first use. The charged once every three months when authorization service station...
  • Page 26 Charging case indicator light Indicator light and working state of cable protection box are designed in accordance with the following table (fault alarm mechanism): control box state power connection charging fault power connection constant on on(1s) on(1s) on(1s) undergrounded constant on constant on protection vehicle connection...
  • Page 27 General charging fault diagnosis In normal use, plug 16A into the power socket first, and the control box will detect the grounding wire of the charging socket first. If no grounding wire is detected, the power lamp and the connecting light will be on and the charging is prohibited. If the ground line is detected, the control box self-check the four indicator lights on (bright 1S), the power indicator lights on;...
  • Page 28 Slow charging mode Before charging, ensure that the starting Pull the lock tongue of the charging port Insert the European standard charging switch is in the state of “OFF”. Step down dust cover, open the charging port dust plug into the standard socket. The power the parking brake pedal, and the power cover, and connect the charging gun to indicator is always on.
  • Page 29 Instrument display when slow charging: 1. Charge connection on indicator light on assembly instrument 2. When charging, the current electric quantity percentage is dynamically displayed as follows When the operation is stopped, first pull out the European standard plug on the power side, and then pull out the charging gun.
  • Page 30: Combination Instrument View

    Instrument and control devices 7inch hardware introduction Indicator light/alarm light Combination instrument view Boot screen Remote key Flamout state interface Door Remaining power (SOC) indication Front door Kinetic energy recovery Anti-theft alarm function Output power Tailgate Speed display Window Driving mileage Power window Gear display Cabin door...
  • Page 31 7inch hardware introduction 1. Up button p. 23 2. Down button p. 23 3. Function button p.. 23 4. Phone frame p. 23 Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving treatment...
  • Page 32: Indicator Light/Alarm Light

    Combination instrument view 1. Indicator light p. 28 2. Output power p. 25 3. Kinetic energy recovery p. 25 4. Warning light p. 28 5. Gear indication p. 26 6. Battery residual capacity p. 23 7. Vehicle speed display p. 26 Charging Instrument &...
  • Page 33 In charging, the icon “ ”dynamic The remaining 10% of the battery bar is “welcome to XEV”. display of the current power percentage red, 20% is orange, 30% is yellow, and the door is not closed to show the status the rest are green.
  • Page 34 • If the driving motor temperature immediately, and contact the XEV is too high, the vehicle will limit new energy authorized service the torque output to ensure that station for maintenance as soon the motor temperature does not as possible.
  • Page 35 Driving mileage Gear display Warning information prompt Display the current warning Displays the current mileage available. Displays the current gear knob position information (R, N, D) when the start switch is in “ACC” or “ON” state. Subtotal mileage display Accumulated mileage display Used to display Subtotal mileage the total mileage...
  • Page 36 Indicator light / warning light Indicator light State Position light This light is on when the position light and passing beam light are turned on. Driving beam light Turn on the driving beam light, and turn this light on. Parking brake working indication This lamp is on when parking is applied.
  • Page 37 It is recommended that you contact XEV special service station for maintenance. (For vehicles with airbags).
  • Page 38 3. This lamp is on when the electric power system fails. It is recommended that you contact EPS (electric power system) fault alarm lamp XEV special service station for maintenance. ATTENTION •...
  • Page 39: Key

    Remote key The remote key unlocks or locks the Take out the mechanical key Vehicle search door remotely and searches the vehicle Push the locking mechanism to the right Press the search button of the remote 1 Remote control search button and pull the pull ring to remove the control to execute the search function.
  • Page 40: Door

    ATTENTION • The specifications of the new battery must be the same as the original battery. • Battery specification: CR2032. • Used batteries must be disposed of in accordance with environmental requirements. • Please keep the spare key in a safe place, not in the car.
  • Page 41 Remote learning function Learning steps for the remote control: small light on - off - on - press the brake pedal twice, and the two keys learn successively. Press the unlock and lock buttons simultaneously while learning. After learning successfully, the double flashing indicator on the central control screen flashes once.After learning successfully, press the brake pedal...
  • Page 42: Front Door

    Front door Open the front door Inside unlocking door A mechanical key unlocks the door When the vehicle is unlocked, pull the When the person is in the car and the With the key to open the left front door, door is locked, pull up the inner handle of the right door joint unlocked;...
  • Page 43 ATTENTION WARNING • In order to protect the lock motor, • Do not leave children or disabled • do not lock and unlock continuously persons alone in the car. in a short time. • Once the lock button is pressed, the door is locked immediately.
  • Page 44: Anti-Theft Alarm Function

    Anti-theft alarm function Tailgate Fortified function ACC is OFF, press the lock key of the remote control, the vehicle enters the state of fortifying, any door is opened abnormally, BCM enters the state of alarm, the left and right turn signal will blink for 30S, the horn will honk for 15 times continuously, the state of the inner door will not change for 30S, the alarm will be over;...
  • Page 45 WARNING • When opening or closing the tailgate, check the safety of the surrounding area to ensure that no one is in the swing range of the tailgate. • When closing the tailgate, take extra care to avoid pinching fingers and other parts. •...
  • Page 46: Window

    Power window Operate the power window down Open/close windows after remote control lock Press the window control button and hold Long press the “lock” button of the remote there, the window down; Release button, control, the window starts and closes the the window can stop at any position.
  • Page 47 Open/close the front cockpit cover Front cockpit cover Open the front charging port cover - front cabin warning safety tag. plate, remove the two front cockpit - Do not put your hand on the rotating cover plate retaining bolts using a parts, the fan may work when the motor sleeve, carefully pry open the front is running and when it is stopped.
  • Page 48: Front Windshield Wiper Operation

    Front windshield wiper operation When the starting switch is in the “ ON” The speed of the intermittent wiper can be adjusted by moving the wiper switch state, the front windshield wiper and upwards from the initial position OFF to the position INT. scrubber can be operated.
  • Page 49: Scrubber Operation

    Scrubber operation ATTENTION • In winter, if the windshield glass is frozen or has snow, you should clear the ice and snow on the wiper arm and turn on the defrost device before using the wiper. • Do not use wipers on dry windshield Windows.
  • Page 50: Light Distribution View

    Lighting device Light distribution view Light distribution view Lights Lamplet Passing beam light Driving beam light Overtaking signal Hazards warning light Turning light Brake light Reversing light Front top light Luci diurne Remote control lights off function Charging Instrument & Lighting Safety Vehicle...
  • Page 51 Viewport of the lights distribution 1. front top light 2. DRL light 3. driving beam light 4. passing beam light Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving treatment maintenance information...
  • Page 52 Light distribution view 1. position light 2. reversing light 3. brake light 4. rear turn signal light 5. registration plate lamp 6. rear reflector Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving...
  • Page 53: Lamplet

    Lamplet Passing beam light Driving beam light When the lamplet is turned on and the left The starting switch is in the state of “ON”, Turn the light switch end knob OFF front door is opened, the alarm prompt turn ON the passing beam light and push position lamplet (including background light and license plate light) on.
  • Page 54: Overtaking Signal

    Overtaking signal Warning lights WARNING • When driving at night on roads without central isolation facilities or without central lines, do not use driving beams within 150 m of approaching vehicles from the opposite direction. • Do not use driving beams on narrow bridges or narrow roads without central isolation facilities or centerlines to meet non-motor vehicles.
  • Page 55: Reversing Light

    Turning lights Brake lights Reversing light The starting switch is in the state of “ON”, 1. The starting switch is in the state of “ON”, press down the brake pedal, and the brake pull the light switch handle forward, and the turn signal ON the right side of the car lamp is ON.
  • Page 56: Front Top Light

    Top light ATTENTION ATTENTION • When the starting switch is in the • Start switch is in OFF mode, press “OFF” state, it is in the all three cases, the remote control “unlock” key, the front top light will be linearly implementation of the unlock, and the extinguished within 0.7s: Close all top light within 0.7s is lit linearly, and...
  • Page 57: Remote Control Lights Off Function

    DRL function Remote control lights off function When driving in the daytime, the starting switch is in the state of “ON”. If the lamplet is not turned ON, the day running light will be ON in the daytime.The lamplet is turned on or the starting switch is in the state of “OFF”, and the day running light is turned OFF during the day.
  • Page 58: Safety Devices

    Safety device Seat belt Use seat belt Seat belt pretensioner Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving treatment maintenance information...
  • Page 59 Seat belt Properly wearing a seat belt can effectively DANGER reduce the possibility of injuring the driver and passenger in an accident. • Check the seat belt system regularly. If the safety belt system is found to be nicked, worn or loose, the safety belt assembly or assembly must be DANGER replaced.
  • Page 60 - Pull the seat belt to make sure it is locked. so as not to affect the correct matching of the lock and the latch. • If the safety belt does not work properly, please contact the XEV new energy vehicle authorized service station for maintenance immediately. Charging Instrument &...
  • Page 61 WARNING • Do not unfasten the seat belt while the vehicle is moving or before it comes to a complete stop to avoid serious injury in the event of an accident. • When unwinding the seat belt, hold the upper end of the safety belt latch tongue with one hand and press the red button beside the lock buckle with the other hand to return the...
  • Page 62 Seat belt pretensioner WARNING When the seat belt pretensioner is working, • Pregnant women are more special the seat belt pretensioner will automatically than the general people, they should tighten the seat belt when the vehicle has a pay more attention to their own moderate to severe frontal impact, reducing safety and the safety of the unborn fetus, and must wear seat belts...
  • Page 63: Vehicle Device

    Vehicle device Seats Air conditioner Rearview mirrors Introduction to Air Conditioning Panel Exterior rearview mirror Functional operation Interior rearview mirror Multimedia display screen Multimedia main interface introduction Internal equipment Door storage bag Boot screen Dashboard storage bag Radio Console storage box Setting interface Cupholder Third-party application interface...
  • Page 64 The importance of properly adjusting the seat Proper seat adjustment ensures that the seat belt provides full protection. WARNING • When adjusting the seat, avoid collision between the seat and the passenger and luggage. • Do not overrecline the seat. •...
  • Page 65: Exterior Rearview Mirror

    • If the electric adjustment function of the exterior rearview mirror fails, you can gently push the outer edge of the mirror to adjust, and contact the XEV new energy vehicle authorized service station for maintenance as soon as possible.
  • Page 66: Interior Rearview Mirror

    Interior rearview mirror Adjust the direction of the interior rearview Anti-glare switching operation mirror Turn the anti-glare dial at the bottom of the Hold the interior rearview mirror, adjust it up and down, left and right direction, and adjust it to the interior rearview mirror to change the angle of best rearview position.
  • Page 67: Door Storage Bag

    Door storage bag Dashboard storage bag Console storage box The door storage bag is located under the The dashboard storage bag is located at the Console storage box can be used to place door interior trim panel, which can be used lower right side of the instrument desk.
  • Page 68: Cupholder

    Cupholder Dashboard storage compartment Sunvisor The console cup holder can be used to store Dashboard storage compartment can be Turn the visor down to block the glare from drinking bottles or cups. used to store some small items. the top of the front windshield, or up to the roof when not in use.
  • Page 69: Console Usb

    Console USB Dashboard USB Phone holder The console 5V power supply can be used to The console 5V power supply can be used The phone holder on the right side of the charge the mobile phone. to charge the mobile phone. center screen (low version) can be used for clamping and fixing the phone.
  • Page 70 Introduzione al pannello del climatizzatore 1. Air volume control switch knob 2. Compressor control button 3. Heating mode button 4. Blow mode adjusting switch knob 5. Central control lock 6. The central lock unlocked Charging Instrument & Lighting Safety Vehicle Starting &...
  • Page 71 Function operations Turn on the air conditioner The air flow Turn on the air conditioning PTC heating The ignition switch is in the “ON” position, Adjust the switch knob icon clockwise Click the PTC icon, the air conditioner starts turn ON the blower, click the A/C icon, the air The air volume is switched between heating, click the PTC icon again, the air conditioning indicator light ON the central...
  • Page 72 ATTENTION • When your vehicle is in the heat of midsummer and the Windows are closed, the interior temperature will be very high. Before driving, it is recommended that you first open all the doors and Windows, turn on the air conditioning, and adjust the air volume to the maximum, so that the temperature in the car will drop rapidly.
  • Page 73: Multimedia Main Interface Introduction

    Multimedia main interface introduction 1. Instrument display interface 2. Radio interface 3. Setting interface 4. Third party APP interface 5. Bluetooth 6. Phone call Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving...
  • Page 74: Boot Screen

    Boot screen: boot animation, voice welcome Click on “ ”. The radio starts, FM after Click to enter into setting interface. message “welcome to XEV” FM, click to save, at most could save five channels, Click Digital Play to save the channel.
  • Page 75 The language selection page shows that the Vehicle information display page, including Time and date Setting page. current support includes Chinese, English and vehicle failure, vehicle prompt, battery and Italian. charging information. Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair &...
  • Page 76 The third party APP interface User Guide display page, and the QR code is Click the third party APP will be Click the map to display the half-screen map displayed on the right side. displayed, click app, could enter app page, interface.
  • Page 77: Bluetooth

    Bluetooth Phone call Click to enter the Bluetooth setting Use after connecting to Bluetooth. Dial interface. interface. If more devices are found, the Bluetooth native Bluetooth name is displayed, XEV2020 and pin number 0000 or 1234. The phone searches for the name of Bluetooth and pairs it. After connecting once, it will automatically connect. Charging Instrument &...
  • Page 78 WARNING WARNING • Keep the car entertainment navigation • Do not store the machine in an system and all parts and accessories out overheated place. High temperatures can of the reach of children. shorten the life of electronics, damage • Please keep it dry.
  • Page 79 Start and driving Driving preparation Parking Run-in period Parking precautions Safety check before driving Emergency stop Precautions before driving Driving in special conditions Correct sitting posture Night driving Check the horn Long distance driving Start driving Driving in special weather One key start Driving in fog Pedal...
  • Page 80: Run-In Period

    Run-in period Do not drive long distance Safety check before driving In order to ensure the service life of the Do not drive long distance during the It is necessary to have a vehicle inspection vehicle, the vehicle should be run in at the running-in period, which will cause wear and before driving.
  • Page 81: Precautions Before Driving

    Interior Precautions before driving ATTENTION • Be sure to familiarize yourself with your On-board tools: confirm that on-board tools vehicle and safe handling methods. • Do not fill the car with a variety of are complete. • Adjust seats, seat belts, interior/exterior children’s toys, although it is easy rearview mirrors, etc.
  • Page 82: Correct Sitting Posture

    Correct sitting posture of driving WARNING Correct driving sitting posture is conducive • It is prohibited to adjust the seat to driving operation, reduce wrong actions, position while the vehicle is in motion. easy to observe the instrument and road •...
  • Page 83: Check The Horn

    Check the horn The use of car horn is for the special road section or emergency warning in advance, to ensure traffic safety. When the starting switch is in any position, press the horn cover set on the steering wheel and the horn will beep.
  • Page 84 Start / stop Start function ATTENTION Step the brake pedal, and the current state is in OFF or ACC or IGN, and press the • After the vehicle is powered off, it can start button. If a legitimate key is found, be restarted after 5s, otherwise the the electronic steering column lock will be vehicle may report a malfunction.
  • Page 85: Pedal

    Pedal Start the vehicle BCM CAN network Dormancy condition - Make sure the remote control keys are in • IGN OFF, CAN stops after 10s; the car; • The door is closed within 10s, and there - Confirm that the switch of the gear knob is is no switch action or remote control turned to the “N”...
  • Page 86: Gear Knob

    Turn to this gear if you need to stop prohibited to continue driving. Stop and temporarily. check as soon as possible and contact the XEV new energy vehicle authorized D: Driving gear service station for maintenance Turn to this gear when driving normally.
  • Page 87: Parking

    Push down the brake pedal when turning the steering wheel, which and then the parking brake pedal. will greatly affect the driving safety. Please contact the XEV new energy vehicle authorized service station for maintenance as soon as possible Charging Instrument &...
  • Page 88 XEV snowed road, the braking distance may be longer too much on its role, please drive new energy vehicle authorized service than that on cement road or dry road.
  • Page 89: Emergency Stop

    Precautions for parking Emergency stop - Press the brake pedal and slow down to In case of emergency, if it is not possible to stop. stop the car in the normal way, the following - Use parking brake as required. steps can be used to stop the car.
  • Page 90 Precautions for leaving the car When leaving the vehicle, you should: • push down the parking brake: page 81 • start/stop button “OFF” gear: page 78 • close all car windows: page 38 • lock the car door: page 35 Do not park vehicles around flammable ATTENTION materials.
  • Page 91: Night Driving

    Night driving Driving for long journey Driving at night should pay attention to the following points: Make sure you are prepared before a long journey and try to get as Driving at night is more dangerous than driving in the daytime. much rest as possible.
  • Page 92: Driving In Fog

    Driving in fog ATTENZIONE ATTENZIONE Precautions for driving in foggy weather: Precautions for driving in foggy weather: • When driving in foggy weather, pay • Fog driving before the vehicle should attention to control the speed, and do be a comprehensive inspection of the not drive at more than 100 km/h.
  • Page 93 Driving on rainy days ATTENTION ATTENTION • When it starts to rain, you should slow • After rainy days, the vehicle should down and drive at a low speed because be cleaned in time to prevent acid the road becomes slippery. substances in the rain from corroding •...
  • Page 94 Driving in hot season Driving in cold season When driving a vehicle in summer, please DANGER follow the summer driving precautions to ensure the safety of others and yourself. • It is forbidden to expose the vehicle to the sun for a long time in hot summer, and it is forbidden to place flammable substances (such as ATTENTION...
  • Page 95 Check the condition of battery and cable ATTENTION ATTENTION Cold weather will reduce the energy of the battery, so the battery should be kept full of • Before driving in winter, you Notes for parking in snow days: power for winter starting. must carefully check the safety When mechanical parking brake may freeze, not equipment on the car: steering,...
  • Page 96 Emergency treatment Emergency treatment Towing Hazard warning lamp Hual and reflective vest Incident treatment Replace fuse Vehicle can’t start Ispecification for fuse of instrument distribution box Vehicle trapped Settle by oneself Flat tyre Use of a warning triangle Charging Instrument & Lighting Safety Vehicle...
  • Page 97 Hazard warning light Use hazard warning lights if the vehicle malfunctions or there is a traffic accident. Press the hazard alarm light switch and all turning signals flash. Press the hazard alarm light switch again and all turning signals are off. Turn on the hazard alarm light in case of the following situations: •...
  • Page 98 The vehicle cannot start The vehicle is trapped If the correct starting procedure for the WARNING vehicle is followed but the vehicle is not started, the following reasons should be • If the vehicle is driven out of the pit by considered: means of front and rear push, ensure •...
  • Page 99 When a tire burst occurs in the process of driving, the vehicle should stop according to the following points for attention. After parking, please contact XEV new energy vehicle authorization service station as soon as possible. Preventive measures for flat tire •...
  • Page 100 Use of warning triangle ATTENTION • Please use the warning triangle correctly according to the corresponding national laws and regulations. The warning triangle is located under the cover of the trunk. When you have a problem with your car and need to pull over to the side of the road, please place a warning triangle at the back of the car to warn you of coming behind...
  • Page 101 Towing Before towing The following situations indicate a possible malfunction of the vehicle. Please contact XEV new energy vehicle authorization service station before towing the vehicle. - The motor runs normally, but the vehicle cannot move. - The vehicle makes an abnormal sound.
  • Page 102 If in an emergency situation can not find a Use a platform trailer Do not use a lift trailer for towing lift trailer or platform trailer, you can use a traction chain or cable to fasten the front of the car in the trailer hook, temporary traction vehicle.
  • Page 103 You should contact XEV new prevent the accident again. towed vehicle do not work. energy vehicle authorization service •...
  • Page 104 Replace the fuse The fuse itself fuses when the electrical equipment is overloaded to cut off the current to protect the electrical equipment of the car. If any electrical equipment does not work, the corresponding fuse may be blown, the fuse should be checked and replaced if necessary.
  • Page 105 Press the fuse box lock tongue to open the Instrument distribution box fuse box. The instrument distribution box is located in the lower right side of the instrument panel inside the guard plate, the relevant accessories need to be removed during inspection.
  • Page 106 Specification for fuse of instrument distribution box Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving treatment maintenance information...
  • Page 107 rated rated A protected component or electrical appliance A protected component or electrical appliance current current standby Frontwiper standby BCM1 ACC signal BCM2 Screen Window Vacumpump BU/MCU ExtMirror Screen AC panel Rooflamp Start switch Brakelight Revers light 7,5A Horn reserved Charging Instrument &...
  • Page 108 rated A protected component or electrical appliance rated current A protected component or electrical appliance current reserved Frontwiper Wiper intermittent relay Blower speed relay3 Blower speed relay2 Blower speed relay1 Fuse tool Horn relay AC relay AC relay ON relay Charging Instrument &...
  • Page 109 Repair and maintenance Regular maintenance Replacement tires Instructions for regular maintenance The wheel transposition Self-maintenance instructions Tyre chain Brake fluid Windshield wipers and scrubbers Windwindow washing liquid, scrubber nozzle Battery, power battery Battery Wiper blade Power battery Cleaning and vehicle maintenance External vehicle maintenance Tyre Tyre inspection...
  • Page 110 ATTENTION • In the vehicle maintenance work, if you need to replace parts, it is WARNING recommended to XEV new energy vehicle authorized service station • For your safety, please read and follow to choose genuine parts, the use of...
  • Page 111 Please use the brake fluid recommended • If the brake fluid level drops and approved for XEV new energy vehicles. significantly in a short period of time, Please refer to page P131 for specifications and there may be leakage or fault in the dosage.
  • Page 112 It is recommended to replace Regularly check the surface of the battery it at the XEV new energy vehicle and the positive and negative terminals for authorized service station. no loosening or corrosion.
  • Page 113 100A, the maximum damage, so the vehicle on the abnormal month when the power battery is less than 30%. XEV company shall not be instantaneous discharge current is less than road surface, need to contact XEV car...
  • Page 114 6 the tire pattern crack or even burst, thus this time should go to the XEV new energy months. causing an accident. vehicle authorized service station as soon as possible to check the tire.
  • Page 115 Check tyre air pressure WARNING • Unscrew the valve cap. • Attach the barometer to the valve mouth. formance. Check tire pressure at least once a month and before long trips. Incorrect • Check the tire pressure. When checking tire pressure can occur in the following the tire pressure, the tire must be in the situations and cause accidents that can cold state.
  • Page 116 Overload operation of the vehicle If you are not sure whether you need to should be avoided to cause damage change your tires, please consult the XEV to the wheels or tires. If the tire tread New Energy Vehicle Authorization Service...
  • Page 117 Only the anti-skid chain when driving on snow and ice free roads. approved by XEV new energy vehicles can be • If you often drive in cold areas or on snow used.
  • Page 118 • If the wiper or windshield glass recommended and approved for XEV new under the action of elastic force. is covered with snow and ice or energy vehicles. Please refer to page P131 for...
  • Page 119 Vehicle exterior maintenance To wash the car High pressure washing station Bumper • Rinse body, wheels and underside of Avoid washing the nozzle too close to the Do not use abrasive cleaner to scrub the vehicle from top to bottom with plenty of window.
  • Page 120 Polish with wax Glass To protect the paint, wax the outside surface When using soapy water or glass cleaning ATTENTION of the vehicle. Before waxing, wash and dry products to clean the glass, do not let it run the vehicle. If the paint surface is hot, place onto the body of the car to avoid leaving any Lavare immediatamente la vettura nelle the vehicle in a cool place before waxing to...
  • Page 121 Vehicle corrosion To prevent vehicle corrosion, the following Check the body paint and trim Proper maintenance of vehicles can prevent If any fragments or cracks are found on guidelines should be observed: long-term corrosion of vehicles. The most the paint surface, they should be repaired common causes of vehicle corrosion are: Salts, Regular car washing can keep the body immediately to prevent corrosion.
  • Page 122 Clean the interior parts • Use vacuum cleaner to remove dirt and Clean leather parts Leather maintenance dust on the interior trim parts of the Use vacuum cleaner to remove dirt and dust Method: Apply a thin layer of curing agent, vehicle.
  • Page 123 Blanket ATTENTION Clean the carpet with a good quality foam- • Do not place the washing cloth type detergent. When cleaning, lather with soaked with detergent on the leather a sponge or brush and scrub the carpet in accessories for a long time, so as not to a circular motion to clean and dry soiled cause the leather to fade or crack.
  • Page 124: Technical Data

    Technical data Technical data Overall dimensions of vehicle Technical parameters of vehicle Drive motor, reducer technical parameters Power battery technical parameters Technical parameters of DC/DC switch Technical parameters of on-board charger Type and dosage of vehicle filling liquid The light bulb information Charging Instrument &...
  • Page 125 Overall dimensions of vehicle Charging Instrument & Lighting Safety Vehicle Starting & Emergency Repair & Technical control devices device device device device driving treatment maintenance information...
  • Page 126: Technical Parameters Of Vehicle

    Technical parameters of vehicle Model Y01/Y01-H Overall dimensions length x width x height (mm) 2530×1500×1560 front (mm) 1320 wheel track rear (mm) 1320 wheelbase (mm) 1680 front suspension (mm) rear suspension (mm) approach angle (°) (no load) departure angle (°) (no load) Minimum ground clearance - full load (mm) Tyre Size 155/65R14 155/60R15...
  • Page 127 Model Y01/Y01-H Unladen mass (kg) 449 (without batteries) Maximum permissible mass (kg) wheel nut torque (N m) 120±10 N m Max speed (km/h) Max driving mileage (km) Minimum Diameter of turning circle (mm) 7000 brake type Four wheel disc brake parking brake type foot brake toe-in (‘)
  • Page 128 Model Y01/Y01-H drive type Rear-engine Rear-drive number of passengers Maximum load mass for front/rear axle (kg) 306/451 Front/rear axle load (kg) 217/265 maximum gradability (%) 0km/h-50km/h acceleration time (s) ≤8 Max. exterior noise in accelerating driving (dB(A)) ≤70 Max. interior noise when vehicle moves at a constant speed (dB(A)) ≤64 brake distance (70 km/h full load) (m) Brake pedal free travel (mm)
  • Page 129: Drive Motor, Reducer Technical Parameters

    Drive motor, reducer technical parameters Type of drive motor system Permanent magnet synnchronous model H021A rated power (kW) Max. power (kW) rated voltage (VDC) scope of input voltage (VDC) 60-90 peak current (A/RMS) 450 (30 s) rated torque (N m) 20,5 peak torque (N m) ≥90...
  • Page 130 Type of drive motor system Permanent magnet synchronous / model H021A noise (dB (A)) ≤70 leak current (mA) ≤10 Electronically controlled storage ambient temperature (°C) -40~85 Electronic control of working environment temperature (°C) -30~55 insulation grade cooling mode (raffreddamento) Natural air cooling protection level IP67 (motor)/IP66(Motor Controller) overall dimensions (mm)
  • Page 131 Technical parameters of the power battery Tipo di cella litio-ferro-fosfato battery changing mode fast battery changing total quantity 1×3 connection in series total weight (kg) single Ah 135 Ah single Ah 3×8=24 Ah per singola unità 135 Ah total voltage / capacity (V/Ah) 72 V/10,37 cycling life ≥2500 times (capacity ≥...
  • Page 132 DC/DC Switcher technical parameters rated output powe (W) rated input voltage (V) input voltage range (V) 54-90 output voltage (V) 13,5±0,3 efficiency operating ambient temperature -25 °C - 50 °C Working environment humidity 5-95% Charging Instrument & Lighting Safety Vehicle Starting &...
  • Page 133: Technical Parameters Of On-Board Charger

    Technical parameters of on-board charger rated output power 2,2 kW Input Voltage Range 90-270 VAC Input Current ≤13 A input frequency 45-65 Hz output voltage 72 V rated output current communication mode oveall efficiency ≥93% power factor ≥0,99 Charging Instrument & Lighting Safety Vehicle...
  • Page 134: Type And Dosage Of Vehicle Filling Liquid

    Type and dosage of vehicle filling liquid filling items filling capacity filling specification reducer lubricating oil 85W/90/GL-4 windscreen washing liquid 1,3 L±20 mL Air conditioning refrigerant 450±10 mm R-134a synthetic brake fluid L-H between (240±10 mm) DOT4 Charging Instrument & Lighting Safety Vehicle...
  • Page 135 Bulb information bulb colour power (W) quantity (pezzi) driving beam light H7-12V-55W white passing beam light H7-12V-55W white 2 (LED) front combination light front clearance light white front turning light amber brake light 2 (LED) esterior reversing light white rear combination light rear clearance light...

Table of Contents