Table of Contents
Advertisement
How to use the secondary light
Turning on/off
Press and hold the on/off button for 0.5 seconds. By default, the secondary light will be in
the flashlight mode. Press and hold the button again for 0.5 seconds to turn off the light.
Once the secondary light is inserted into the primary light and locked into place, it will
automatically turn off.
Switching modes
While the secondary light is on, press the on/off button to cycle through the flashlight and side
light modes.
Note: Brightness or color temperature cannot be adjusted when in flashlight or side light
modes.
Battery level indicator
In operation:
Battery level ≤ 10%: blinks red
10% < Battery level ≤ 30%: keeps red
Battery level > 30%: off
While charging:
While charging, the battery level indicator will breathe in white. Once the battery is fully
charged, the battery level indicator will breathe in white for 20 seconds and then go out.
How to charge
Secondary light attached to primary light
When a Type-C charging cable is plugged in, the primary light and secondary light will be
charged at the same time.
When a Type-C charging cable is not plugged in, the primary light will charge the secondary
light until it is fully charged.
7
Advertisement
Table of Contents
