Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Xiaomi MJLYD001QW
- Page 1 Multi-function Camping Lantern User Manual Original instructions...
-
Page 2: Safety Precautions
Read this manual carefully before use, and retain it for future reference. Safety Precautions Cautions Reasonable use Please use the product correctly as described in this manual. Charging notices Please use a qualified charger that meets the camping lantern's specifications. If the camping lantern has not been used for a long period of time and the indicator on the primary light does not work properly when charged again, continue charging for 30 minutes and then check whether the indicator works normally. - Page 3 Maintenance services This product cannot be disassembled and should only be repaired by technicians authorized by Xiaomi. To avoid injury, do not attempt to repair it by yourself. Battery safety warnings Do not open or cut the battery. Do not expose the battery to heat or flames. Keep the battery away from direct sunlight.
-
Page 4: Product Overview
Product Overview The camping lantern is divided into two parts – the primary light and the secondary light. It has the ability to switch between different light effect modes to provide different experiences. Primary light Upper Cover Control Knob Waterproof Seal Camping Lantern Mode Button Bottom Cover... - Page 5 Secondary light Charging Contacts Side Light On/Off Button Lens Suspension Loop Secondary Light Cylinder Battery Level Indicator Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
-
Page 6: How To Use
How to Use Installing and unlocking the secondary light Rotate clockwise Rotate counterclockwise to lock to unlock How to use the primary light Turning on/off Press and hold the on/off button for 0.5 seconds to turn the primary light on. By default, the primary light will be in the mode and state it was in when it was last turned off. - Page 7 Adjusting brightness While in the always-on mode, turn the control knob clockwise to increase brightness and counterclockwise to decrease brightness. While in the color light mode, turn the control knob clockwise to increase brightness and counterclockwise to decrease brightness. Brightness cannot be adjusted while in candle flicker, breathing, or flowing color modes. Adjusting color temperature/color Always-on mode: While pressing and holding the control knob, turn clockwise to increase color temperature, and turn counterclockwise to decrease color temperature.
-
Page 8: Switching Modes
How to use the secondary light Turning on/off Press and hold the on/off button for 0.5 seconds. By default, the secondary light will be in the flashlight mode. Press and hold the button again for 0.5 seconds to turn off the light. Once the secondary light is inserted into the primary light and locked into place, it will automatically turn off. - Page 9 The secondary light cannot be charged independently. Connecting with the Mi Home/Xiaomi Home App This product works with the Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already.
- Page 10 Note The version of the app might have been updated, please follow the instructions based on the current app version. Resetting Bluetooth Press and hold the on/off button of the primary light for seven seconds to reset the camping lantern's Bluetooth connection. The camping lantern will automatically restart. Note: After the Bluetooth connection is reset, tap the "+"...
-
Page 11: Troubleshooting
Troubleshooting Issues Possible Causes Solutions When pressing the on/off The lithium-ion battery Please promptly charge button, the camping level is low. the battery. lantern doesn't respond or the indicator on the primary light blinks red. The indicator on the 1. The charging cable isn't 1. -
Page 12: Specifications
Specifications Model: MJLYD001QW Item Dimensions: 198 × 114 × 123 Net Weight: Approx. 565 g Battery Type: Lithium-ion battery Primary Light Specifications: Secondary Light Specifications: Input: 5 V Input: 5.8 V 0.38 A Brightness Adjustment: 6 lm–230 lm Flashlight Luminous Flux: 120 lm Color Temperature Adjustment: 2700–5000 K... -
Page 13: Regulatory Compliance Information
Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai HOTO Technology Co., Ltd. (a Mi Ecosystem company) Address: Building 45, No.