Advertisement
Table of Contents
U s e r M a n u a l
CAM-VW10
PRODUCT FEATURES:
Image Sensor: 1/3" CMOS
TV Lines: 700
Resolution: 500 x 582
Minimum Illumination: 0 Lux
TV System: PAL
Waterproof Rating: IP69K
Viewing Angle: 120 Degrees
Infra-Red LED's: Yes
Enhanced Performance In Low Light: Yes
Current Consumption: 45-141mA @ 13.8V
Operating Voltage: 12V DC (Negative Ground)
Operating Temperature: -40 Degrees C to +80 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
www.c2vision-eu.com
Volkswagen Brake Light Reverse Camera
Volkswagen Transporter T6 2017>
Advertisement
Table of Contents
Related Manuals for Connects2Vision CAM-VW10
Summary of Contents for Connects2Vision CAM-VW10
- Page 1 U s e r M a n u a l CAM-VW10 Volkswagen Brake Light Reverse Camera Volkswagen Transporter T6 2017> PRODUCT FEATURES: Image Sensor: 1/3” CMOS TV Lines: 700 Resolution: 500 x 582 Minimum Illumination: 0 Lux TV System: PAL...
- Page 2 1. Remove the third brake light from the vehicle and unplug the connection cable 2. Connect the 4pin connector from the CAM-VW10 to the 4pin connector on the extension cable, then attach it to the vehicle taking care not to trap any cables 3.
Need help?
Do you have a question about the CAM-VW10 and is the answer not in the manual?
Questions and answers