Table of Contents
Advertisement
10. The Load Driver window appears as shown below. Select the
appropriate cellphone model and Firmware list (e.g., Select
1510C_US.336 for 33.6 kbauds) and click on load driver. The driver is
downloaded into the modem flash memory. This takes from five to
ten minutes. Once the driver is downloaded, there is no need to
download the driver again unless you change cellphone models.
CAUTION
Please DO NOT cancel the download, once you have started
loading the driver. Cancelling abruptly may damage the firmware on
the modem. Even if you need to change the driver, wait until the
download process is completed and then load the appropriate driver.
11. After the driver is downloaded, the following screen appears. Once
the driver is downloaded, AutoLine Setup automatically configures
the modem for cellular use. So there's no need to reboot each time
you switch between a telephone and a cellular connection. Exit the
Load Driver window by choosing Exit.
Page 9
Advertisement
Table of Contents
