Advertisement
Congratulations on your purchase of Sima's GoDVD! Model CT-200
This package includes: (1) Go-DVD! - Model CT-200, (1) RCA style
Video Cable, (1) 7.5V, 500 mA AC adapter and this Instruction Manual
Notice: Use of this product for unauthorized duplication of
copyrighted material from DVD, VHS or other media is strictly
prohibited under the federal Copyright laws unless the copy qualifies
as a fair use under the Copyright laws.
FCC Information
This equipment generates and uses radio frequency energy and if not installed and used
properly, that is, in strict acceptance with the manufacturer's instructions, may cause
interference to radio and television reception. It has been type tested and found to comply with
the limits for a Class B computing device in accordance with the specifications in Subpart J of
Part 15 of FCC Rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause interference to radio and
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
* Re-orient the receiving antenna
* Relocate this equipment with respect to the receiver
* Move this equipment away from the receiver.
* Plug this equipment into a different outlet so that this equipment and receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find "How to Identify and resolve
Radio/Television Interference Problems" prepared by the FCC helpful. The booklet is available
from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4
1
Troubleshooting
Possible Solutions
•
Device does not
Press Input select switch to toggle between
operate
composite and s-video inputs.
•
Has correct mode (AV, Line, Tuner, etc.) been set
on the VCR or DVD
•
Correct connecting cable?
•
Have the RCA cables been mixed up at the input
and output of the VCR/DVD?
•
Is the Power light on? If not, there is no
No picture
power.
•
Is the connecting cable of the plug-in
adapter damaged?
Picture rolling
or black and white
•
TV does not support 50/60 Hz scan rates.
GoDVD! will not perform the following functions:
1. Allow you to play a PAL DVD or video tape on a NTSC player.
(and visa versa)
2. Allow you to play a PAL DVD or video tape on a NTSC TV that
supports only 60 Hz scan.
3. Allow you to copy an NTSC DVD or video tape to an NTSC DVD
recorder or VCR in the PAL format to send over seas, unless the
recorder supports both formats.
6
Advertisement
