Troubleshooting
Possible Solutions
•
Device does not
Has correct mode (AV, Line, Tuner, etc.) been set on the
operate
VCR or DVD
•
Correct connecting cable?
•
Have the RCA cables been mixed up at the input and
output of the VCR/DVD?
•
No picture
Is the Power light on? If not, there is no power.
•
Is the connecting cable of the plug-in adapter damaged?
•
Make sure VCR/TV is not set to channel 3 or 4 and that
AV, Line or appropriate mode is selected.
•
Picture rolling
TV does not support 50/60 Hz scan rates.
Specifications
Video Format - NTSC (FSC= 3,58 MHz)
INPUT CONNECTORS
Composite Video (RCA jack) x 1
Power: DC 7.5V 500mA
OUTPUT CONNECTORS
Composite Video (RCA jack) x 1
Dimensions: 4.5"(W) x 2.5"(L) x .75"(H)
Congratulations on your purchase of Sima's GoDVD! (Model CT-100) This
package includes: (1) Go-DVD! - Model CT-100, (1) RCA style Video Cable
(1) 7.5V, 500 mA AC adapter and This Instruction Manual
Connection Notes: First, connect your player (VCR/DVD) to your recorder
(VCR/DVD) to your TV. Verify that your hook-up cables are working. Then
disconnect the yellow video cable and connect the CT-100 as shown below.
After connecting the CT-100 the red light will turn on showing that the CT-100 is
powered up and in standby mode. Press the POWER button to turn the unit on.