LG 55LV75D Manual page 63

Timer
Immediately: Performs the ISM function immediately after the ISM Method menu window disappears. The
y y
Period/Time option is disabled.
a) Inversion: Inverts the screen every 30 minutes.
b) Orbiter: The image moves 3 pixels every 2 minutes in a certain order.
c) User Image: Displays the image on repeat until you press the EXIT button on your remote control.
Repeat: Performs the ISM function for a specified amount of time in each period. (Period and Time are only
y y
enabled when Repeat is selected.)
a) Inversion: Inverts the screen for a specified amount of time and then restores the screen to its original
settings. The period will be calculated again after the screen is restored.
b) Orbiter: Moves the image 3 pixels at specified time intervals. In Repeat mode, the Orbiter function is
terminated only when a movie is output or when there is a button input from the remote control.
After the termination of the Orbiter function, the period will be calculated again.
c) User Image: You can terminate User Image by pressing the EXIT button on your remote control before a
specified time passes. After termination of the User Image function, the period will be calculated
again.
Period
You can set the period between 1 and 24 hours.
y y
When there is a button input from your remote control, this function is terminated and the period is calculated
y y
again.
Time
You can select from among 1 - 10 mins / 20 mins / 30 mins / 60 mins / 90 mins / 120 mins / 180 mins / 240 mins
y y
The ISM function is performed for a specified period.
y y
NOTE
Still Image Detecting and ISM Method
If you set Still Image Detecting to Yes, the ISM function starts when the amount of time the image has been still
y y
reaches a specified period. When a movie is output, the function is terminated and the period is recalculated.
If you set Still Image Detecting to No, the ISM function starts when the amount of time no button input from the
y y
remote control is detected reaches a specified period.
25