LG 55LV75D Manual page 47

Sync Mode
This feature allows you to sync the start times of contents (videos or images that have been distributed by
y y
SuperSign Software) played back on the Master and Slave monitors.
If you set Sync Mode to Off, the sync feature is disabled.
y y
A Slave monitor plays contents at the same time as the Master monitor.
y y
While Sync Mode is performed, RS-232C control of other commands may not work.
y y
(This feature may not be available with some models.)
Sync Mode
(Only for SE3C models.)
The Sync feature is used to start playing content (video or image) distributed by Elite-W across multiple
y y
monitors connected via RS-232C at the same time.
If set to Off, the Sync feature is disabled.
y y
If set to Master for a monitor, the monitor is set as the reference monitor.
y y
If set to Slave for a monitor, the monitor plays content at the same time as the Master monitor.
y y
DPM Wakeup Control
This feature sets conditions for releasing the DPM status according to the DVI/HDMI's processing of digital
y y
signals.
Clock: Checks the clock signal of the digital signal and, if the clock signal exists, releases the DPM status.
y y
Sync: Releases the DPM status when both the clock signal and data of the digital signal are entered.
y y
Still Image Detecting
This feature detects still images.
y y
If you set this feature to Yes, you can use the RS-232C command for detecting still images.
y y
PM Mode
This feature activates some of the monitor's functions after it enters Off status, allowing the monitor to remain
y y
practically the same as when it is turned on.
Power Off: All functions remain turned off except some functions (Power, Time, etc.) when the monitor turns
y y
off. (Extended Display Identification Data (EDID) may be sustained depending on the input and
model.)
Sustain Aspect Ratio: Sustains Extended Display Identification Data (EDID) even when the monitor is turned off.
y y
Screen Off: Only turns off the screen and audio when the monitor enters Auto Off/Automatic Standby/DPM.
y y
Network-based control is possible.
Screen Off Always: Has the same function as PM Mode's Screen Off. Entering and releasing the Screen Off status
y y
using a remote control is also possible.
9