PARIS RHONE PE-LT002 - 4K UST Laser Projector Quick Start Guide

Introduction

The Parisrhone Venus 4K Projector and the projection area require a flat surface to produce an even image. In most cases, a distorted image is caused by an uneven surface such as a curved or textured wall.

Leave enough cooling space (at least 11.8 inch on each side) for the projector.

For optimal projection, it is recommended to use in a dark environment. A screen compatible with ultra short throw projectors can be used to enhance your viewing experience.

Adjustment

Select a system language

(default: English).
You can select Traditional Chinese, German, French, Italian, Spanish, Japanese, Portuguese, and Arabic.

Bluetooth pairing

Press and hold the Return and Menu buttons simultaneously for 3 seconds to pair the remote control via Bluetooth. Make sure:

1. the batteries are installed in the remote control
2. the projector is turned on by pressing the power button
3. the remote control is close to the projector (within 5 meters)
   

Network connection

Choose and connect to your network of choice.

Fine-tune

Fine-tune the projection with Keystone Correction/Electric Focus.

Select the time zone and format

Start of viewing

Then you can start viewing your files through the HDMI ports/USB ports or get apps from the App Store.

In the HDMI interface, press the Menu button to enter the submenu interface. Turn on HDMI 2.0 to support 4K 60 Hz output and HDR10.

Technical problems

Most technical problems can be solved by rebooting the projector.
Hold the Power button down until it turns off, then press once to turn on.
If the problem persists, perform a Factory Reset:
Go to Settings -> General -> Restore Factory Settings.