Advertisement
Quick Links
Advertisement
Related Manuals for Paris Rhone PE-LT002
Summary of Contents for Paris Rhone PE-LT002
- Page 1 4K UST Laser Projector PE-LT002...
- Page 3 & IMPORTANT SAFETY INSTRUCTIONS 1. ABOUT LASER LIGHT • Never look into the projector lens when the laser is turned on; this can result in eye damage. · Do not try to dismantle the projector. It contains a high-power laser component;...
- Page 5 Parisrhone Laser Projector...
- Page 6 Parts and Components PROJECTOR Front/Top 1. Speaker 4. PIR Sensor 2. Power Button 5. Lens 3. Status Indicator Boot1ng/Shutt1ng down Outage/ Abnormal ---------- Powered but not on...
- Page 7 Side 6. Height Adjusting Wheels 7. USB2.0 Rear/Bottom 8. USB Port 9. HDMI Input 1 10. HDMI Input 2 (ARC) 11. Audio Output 12. AV Input 13. Ethernet Port 14. Power Port 15. Rear Foot 16. Speaker Air Vents 17. Front Foot *2...
- Page 8 REMOTE CONTROL � � 1..., "./ ----1. •-----1 7 4�1 � @------+ 12------e- 1 . Power 9. Return 1 0. Settings 2 . Indicator Light 3 . Mute 1 1. Home 4. Up 12. Signal 5. Left 1 3. Menu 6.
- Page 12 Quick Installation Guide PREPARATION Install the electrical outlet near the equipment. It should be easily accessible. Take the 4 following items into consideration when installing the projector: 1) Distance between the projector back and the wall (W1) 2) Height: image width (height) (H1), height between the bottom of the image and the desk (H2), height of the desk (H3), and the recommended height of the wall (H4) 3) Surface for placing the projector...
- Page 13 Parameters for Projection (100" for example) _L 3 _ ( fl7 , 2in ) � - �)-- - - - - L 1 8?. 2 �:::::::::;;;=3 ( 75.?in ) Projection Distance & Image Dimensions Device Image Image Device-Wall Image-Desk Image Length Width Height Gap...
- Page 14 Desk Desk Wall Wall Desk Width Length Height Width Length (W2) (H 4 ) Image {L2) (H3) (L3) Mobile Immobile Image H4;;.H1+ center at L3;;.L1 Desk: Desk: L2;;.L H2+H3 (W2;;.W) (W2;;.W+W1) 1.3m high ;;.177.1cm ;;.179.Scm 53.9cm ;;,,45_3cm 80" I 70.Sin / 21.2in / 69.7in / 17.Sin...
- Page 15 Tips: INSTALLING THE PROJECTOR Place the projector on the desk. Move to an appropriate distance for the desired image size while keeping the device parallel with the wall. Connect the projector to a power source and press the Power button on the device or remote to turn it on.
- Page 16 2.2 Functions � 1. MOTION DETECTION There are two Pl R motion sensors at the front of the projector; when it detects human approaching, the projector will dim the brightness of the laser light to prevent any potential eye damage. This function is active by default and can be disabled in Settings ->...
- Page 17 3. DOLBY AUDIO AND DTS DECODING The projector supports Dolby Audio and DTS (dedicated to sound) decoding, perfect for a home theater. 1) Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. 2) For DTS patents, see http:/ /patents.cits.com.
- Page 18 � Operation Guide 1. POWER ON/OFF Connect the projector to a power source. Press the Power button on the projector or the remote to power it on / off. 2. POSITION ADJUSTMENT Refer to the following instructions to adjust the position of the projector and get an undistorted image.
- Page 19 · Signal source: HDMl1, HDMl2 and AV · Tools: File Manager, App Manager, Local Application, Setting and Help. 4. CONNECTION WITH PERIPHERALS You may connect PS4 game console, ROKU TV, computer, etc., via the HDMI port, DVD device by the AV port, USB device/keyboard/mouse by the USB port (refer to 5.
- Page 20 RAW: No processing for the source audio. Recommended for Dolby Audio and DTS sources for better performance. - HDMI ARC: Output the sound via the HDMI ARC port...
- Page 21 1) Internal Flash You can save files to the projector storage, including the apps downloaded, files downloaded in the app, files in the USB drive, etc. 2) Using the USB drive Plug in the USB drive and view files on the interface. 3) NetHood You can view files shared by other devices on the same network by NetHood.
- Page 22 7. PAIRING VIA BLUETOOTH Select the Bluetooth icon at the top right corner to enter the Bluetooth interface. 1) Use as Bluetooth speaker Turn on Open Detection, select Input for Audio Mode on the interface, find and select the projector model under Bluetooth Devices on your phone or laptop to play audio via the built-in speaker of the projector (go to Settings->...
- Page 23 8. NETWORK SETTING Select the Network icon at the top right corner to enter the network setting interface. For wired connection, plug in the Ethernet cable. For wireless connection, find the network name on the drop-down list, select, and enter the password to connect. The software supports network anomaly detection.
- Page 24 9. SYSTEM UPGRADE OTA update Select Settings-> About-> Check for Updates to update the system. 10. IMAGE SETTINGS Go to Settings-> Image, or press the Settings button to enter the interface.
- Page 25 1) Image Settings You can select the image mode or adjust the brightness, contrast, chroma, hue and definition. 2) Advanced Settings You can select the MEMC mode or adjust the dynamic contrast, color temperature, refresh rate or reset to factory settings. 3) Light Source Settings You can select the light source mode or adjust the light source brightness.
- Page 26 ■■■■■■■■■ ■■■■■■■■■' · ■ ■■■■■■■■ ••••••••• ■■■■■■■■■ ••••••••• ■ ■■■■■■■■ ••••••••• ••••••••• ..••••••••• ••••••••• ••••••••• !!1!1 !1 !1■■■1!!111 ■!l■!l-■1!!11 ......•••••••• •••••••• l!ll 11. PLAYBACK SETTINGS When playing videos, press the Menu button to prompt a sidebar menu which includes the followings: Video ratio, Sound track, Subtitle, Playback settings, Cycle mode, and Audio Effect.
- Page 27 ♦ •J CLEANING AND MAINTENANCE...
- Page 28 • Before cleaning, unplug the power cord from the socket. Wipe the exterior of the projector routinely with the provided cleaning cloth or a cloth designed for professional use. Do not apply abrasive detergent, solvent or other coarse chemicals to avoid scrapes. •...
- Page 29 • TROUBLE- SHOOTING...
- Page 30 Parisrhone Parisrhone...
- Page 31 Q: The image isn't clear/there is no image. A: · Make sure the original video is in high definition. · Check that the projector is in focus: go to Settings-> Image-> Electric Focus to adjust accordingly. · Power off the device and unplug the power cord. Plug it again after 1 min and power on the device.
- Page 32 Q: The system prompts a message of high temperature and the device shuts off automatically. A: Make sure the device is working in a proper ambient temperature (within the device's working temperature range) and that the vents are not blocked. Restart the device. Q: The device cannot be powered on.
- Page 33 support@parisrhone.co...
- Page 36 Parisrhone Laser Projector...
- Page 62 Parisrhone Parisrhone...
- Page 65 support@parisrhone.co...
- Page 68 Parisrhone Laser Projector...
- Page 94 Parisrhone Parisrhone...
- Page 97 support@parisrhone.co...
- Page 100 Parisrhone Laser Projector...
- Page 126 Parisrhone Parisrhone...
- Page 129 support@parisrhone.co...
- Page 132 Parisrhone Laser Projector...
- Page 158 Parisrhone Parisrhone...
- Page 161 support@parisrhone.co...
- Page 164 Parisrhone Laser Projector...
- Page 190 Parisrhone Parisrhone...
- Page 193 support@parisrhone.co...
- Page 196 Parisrhone Laser Projector...
- Page 222 Parisrhone Parisrhone...
- Page 225 support@parisrhone.co...
- Page 228 Parisrhone Laser Projector...
- Page 254 Parisrhone Parisrhone...
- Page 256 US： support@parisrhone.co, JP： support.jp@parisrhone.co DE： support.de@parisrhone.co, UK： support.uk@parisrhone.co IT： support.it@parisrhone.co, FR： support.fr@parisrhone.co ES： support.es@parisrhone.co...
- Page 259 US：support@parisrhone.co JP：support.jp@parisrhone.co DE：support.de@parisrhone.co UK：support.uk@parisrhone.co IT：support.it@parisrhone.co FR：support.fr@parisrhone.co ES：support.es@parisrhone.co Manufacturer: Shenzhen Danya Technology Co.,Ltd. Address: Room 3323,Building C,Galaxy World Phase Ⅱ,Minle Community,Minzhi Street,Longhua District,Shenzhen...
- Page 260 www.parisrhone.co...