Table of Contents
Advertisement
VCB and VCB N C.Tec Bags 12 bar (174 psi)
Protective cap VCB N
Protective cap VCB
Page 5/22
e. Protective cap
To protect the load plate and the adhesive rubber
against damage, the Vetter protective cap must be
used every time the C.Tec lifting bags are used.
The protective cap also increases the friction
between the load plate and the ground or the
load plate and the load to be lifted. This reduces
the risk of the lifting bag being thrown out and
the load plate and the adhesive rubber being damaged.
Inventory check
On acceptance of the C.Tec Bag equipment a check is to be made to see if
the delivery is complete according to the delivery note. In addition to this
a visual check and function test is to be made according to the operating
instructions.
2.2
Other accessories
Artikel-Nr.
Bezeichnung
Pos.
Pressure regulator 200/300
bar
1600034000
US Version 4500 psi
1
or
(not compatible with below
1600032000
mentioned compressed air
bottles)
2
1600010800
Comp. air bottle
3
1600019900
Comp. air bottle
4
1600009100
Dual connector
5
Pressure regulator
1600014500
Adapter for construction site
6
1600012000
compressor
6 l / 300 bar
9 l / 300 bar
300 bar
Advertisement
Table of Contents
