Zanussi ZBA 3160 Instruction Booklet page 42

Ha
Hc
PR33
7. Fix cover (Hc) on guide (Ha) until it clips into
place.
PR167
8. Open the appliance door and the furniture door at
90¡. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
PR167
9. Remove the squares and mark a distance of
8 mm from the outer edge of the door where the
nail must be fitted (K).
42
8mm
Ha
Hb
8mm
K
Ha
PR168
10. Place the small square on the guide again and fix
it with the screws supplied.
Should the alignment of the furniture door be
necessary, use the clearance of slots.
At the end of this procedure, it is necessary to
check if the door of the furniture closes properly.
Hb
Hd
PR167/1
11. Fix cover (Hd) on the small square (Hb) until it
clips into place.
Hb