Siemens SL65 Operating Manual page 42

46 Setup
Data services
Default setting and activation of the
connection profiles for the applica-
tions WAP. The phone default
MMS,
setting varies from service provider
to service provider: consult your
service provider or go to this address
in the Internet for more information
www.siemens-mobile.com/customercare
in the FAQ section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult your service provider
or go to this address in the Internet
for more information
www.siemens-mobile.com/customercare
in the FAQ section.
Authentication
Activate or deactivate encrypted
internet dial-up (CSD connections
only).
Fax/data
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
Rec fax/data
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.
Security
¢
C
¢
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
ProSlide lock
Enable/disable automatic keylock
when closing keypad. The keys are
always unlocked automatically when
opening the keypad.
b
Additional information
Block/unblock in standby mode. In each
case:
#
¢
Security
T
Select function.
Press and hold.
b