Siemens SL65 Operating Manual page 14

¢ ¢
Security
C
T
¢
Select function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with
Chg.phonecode
(Change phone code)
You define the phone code (4–8 dig-
its) when you call up a phone-code
protected function for the first time
(e.g. Direct call, p. 47). It is then valid
for all phone-code protected func-
tions.
Following the third unsuccessful at-
tempt, access to the phone code and
the functions that use it is denied. If
this occurs, contact the Siemens
Service (p. 56).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your serv-
ice provider.
¢
Codes
Change PIN.
Preventing accidental
activation
Even if PIN use is deactivated (p. 14)
confirmation is required to switch on
the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
Press down.
B
Press this key. The phone
C
switches on.
Press this key or take no
§Cancel§
action. The phone does
not switch on.
Security 15